编码系统
4.3.0 Code Systems
Vocabulary Work Group
The following names (URIs) may be used in the system element of the Coding data type. If a URI is defined here, it SHALL be used in preference to any other identifying mechanisms. If a code system is not listed here, the correct URI may be determined by working through the following list, in order:
- the HL7 OID Registry
- the documentation associated with the code system
- consulting the owner of the code system
- asking on the HL7 vocabulary mailing list
See also the list of known identifier systems that can be used in the system element of the Identifier data type. Additional identifier systems may be registered on the HL7 FHIR registry at http://hl7.org/fhir/registry .
Important Notes:
- This list of names is incomplete and subject to change. Some values may be dropped, and others will likely be added in the coming months as HL7 institutes formal processes around URIs in vocabulary
- Note that some of the URNs in this list follow the URN specification in RFC 5141 for referring to standards published by ISO, such as urn:iso:std:iso:11073:10101. Where ISO standards define codes with meanings, and there is no entry in the list above, and they are not registered in the HL7 OID registry, the default URN for the code system is that defined by the RFC 5141.
- For several of the code systems in this list, multiple systems are given. This means that the variants identified are different code systems, not just variants of the same code system
- Any URL in
http://example.org
is reserved for testing and documentation purposes.
Note that the code systems are available as FHIR resources - see the Downloads Page (as part of the FHIR definitions) (excluding the External code systems.
UMLS Note: The UMLS includes many code systems that do not have an entry in the table below, or in the HL7 OID registry, or on http://registry.fhir.org. Until these code systems are registered, implementers may use the pattern http://www.nlm.nih.gov/research/umls/[SAB]
, where [SAB] is the lowercase of abbreviation of the code system as provided by UMLS. e.g. The system for “Multum MediSource Lexicon” would then be http://www.nlm.nih.gov/research/umls/mmsl
. Implementers choosing to use this pattern should be aware that very often, when the code system is registered, it will use a different system.
Don’t see what you’re looking here? See Registering Code Systems for further advice.
URI
Source
Comment
OID (for non-FHIR systems)
Externally Published code systems
SNOMED CT (IHTSDO )
2.16.840.1.113883.6.96
http://www.nlm.nih.gov/research/umls/rxnorm
RxNorm (US NLM )
2.16.840.1.113883.6.88
LOINC (LOINC.org )
2.16.840.1.113883.6.1
UCUM: (UnitsOfMeasure.org ) Case Sensitive Codes
2.16.840.1.113883.6.8
See Using NCI Metathesaurus with FHIR
2.16.840.1.113883.3.26.1.2
http://www.ama-assn.org/go/cpt
2.16.840.1.113883.6.12
NDF-RT (National Drug File – Reference Terminology)
2.16.840.1.113883.6.209
Unique Ingredient Identifier (UNII)
2.16.840.1.113883.4.9
2.16.840.1.113883.6.69
2.16.840.1.113883.12.292
urn:iso:std:iso:3166
See Using ISO 3166 Codes with FHIR
1.0.3166.1.2.2
Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5)
2.16.840.1.113883.6.344
http://www.nubc.org/patient-discharge
NUBC code system for Patient Discharge Status
National Uniform Billing Committee, manual UB-04, UB form locator 17
2.16.840.1.113883.6.301.5
(Includes play book codes)
2.16.840.1.113883.6.256
ICD-9, ICD-10
WHO ) & National Variants
See ICD page for details
http://hl7.org/fhir/sid/icpc-1
http://hl7.org/fhir/sid/icpc-1-nl
http://hl7.org/fhir/sid/icpc-2
ICPC (International Classification of Primary Care) (PH3C )
2.16.840.1.113883.2.4.4.31.1
2.16.840.1.113883.6.139
http://hl7.org/fhir/sid/icf-nl
ICF (International Classification of Functioning, Disability and Health) (WHO )
2.16.840.1.113883.6.254
http://terminology.hl7.org/CodeSystem/v2-\[X\](/v)
[X] is the 4 digit identifier for a table; e.g. http://terminology.hl7.org/CodeSystem/v2-0203
Note: only some tables may be treated in this fashion. For some tables, the meaning of the code is version dependent, and so additional information must be included in the namespace, e.g. http://terminology.hl7.org/CodeSystem/v2-0123/2.3+, as defined in the v2 table namespace list. Version 2 codes are case sensitive.
2.16.840.1.113883.12.[X]
http://terminology.hl7.org/CodeSystem/v3-\[X\]
[X] is the code system name; e.g. http://terminology.hl7.org/CodeSystem/v3-GenderStatus. HL7 v3 code systems are case sensitive.
see v3 list
GTIN (GS1 )
Note: GTINs may be used in both Codes and Identifiers
1.3.160
Anatomical Therapeutic Chemical Classification System (WHO )
2.16.840.1.113883.6.73
urn:ietf:bcp:47
IETF language (see Tags for Identifying Languages - BCP 47 )
This is used for identifying language throughout FHIR. Note that usually these codes are in a code
and the system is assumed
urn:ietf:bcp:13
Mime Types (see Multipurpose Internet Mail Extensions (MIME) Part Four - BCP 13 )
This is used for identifying the mime type system throughout FHIR. Note that these codes are in a code
(e.g. Attachment.contentType and in these elements the system is assumed). This system is defined for when constructing value sets of mime type codes
urn:iso:std:iso:11073:10101
Medical Device Codes (ISO 11073-10101 )
2.16.840.1.113883.6.24
http://dicom.nema.org/resources/ontology/DCM
DICOM Code Definitions
The meanings of codes defined in DICOM, either explicitly or by reference to another part of DICOM or an external reference document or standard
1.2.840.10008.2.16.4
http://hl7.org/fhir/NamingSystem/ca-hc-din
Health Canada Drug Identification Number
A computer-generated eight-digit number assigned by Health Canada to a drug product prior to being marketed in Canada. Canada Health Drug Product Database contains product specific information on drugs approved for use in Canada.
2.16.840.1.113883.5.1105
http://hl7.org/fhir/sid/ca-hc-npn
Health Canada Natural Product Number
A computer-generated number assigned by Health Canada to a natural health product prior to being marketed in Canada.
2.16.840.1.113883.5.1105
http://nucc.org/provider-taxonomy
The Health Care Provider Taxonomy code is a unique alphanumeric code, ten characters in length. The code set is structured into three distinct “Levels” including Provider Type, Classification, and Area of Specialization.
Copyright statement for NUCC value sets:
This value set includes content from NUCC Health Care Provider Taxonomy Code Set for providers which is copyright © 2016+ American Medical Association. For commercial use, including sales or licensing, a license must be obtained
2.16.840.1.113883.6.101
Code Systems for Genetics
HGNC: Human Gene Nomenclature Committee
2.16.840.1.113883.6.281
ENSEMBL reference sequence identifiers
Maintained jointly by the European Bioinformatics Institute and Welcome Trust Sanger Institute
not assigned yet
http://www.ncbi.nlm.nih.gov/refseq/
RefSeq: National Center for Biotechnology Information (NCBI) Reference Sequences
2.16.840.1.113883.6.280
http://www.ncbi.nlm.nih.gov/clinvar/
NCBI central repository for curating pathogenicity of potentially clinically relevant variants
not assigned yet
not assigned yet
HGVS : Human Genome Variation Society
2.16.840.1.113883.6.282
http://www.ncbi.nlm.nih.gov/projects/SNP
DBSNP : Single Nucleotide Polymorphism database
2.16.840.1.113883.6.284
http://cancer.sanger.ac.uk/
cancergenome/projects/cosmic
COSMIC : Catalogue Of Somatic Mutations In Cancer
2.16.840.1.113883.3.912
LRG : Locus Reference Genomic Sequences
2.16.840.1.113883.6.283
OMIM : Online Mendelian Inheritance in Man
2.16.840.1.113883.6.174
http://www.ncbi.nlm.nih.gov/pubmed
2.16.840.1.113883.13.191
PHARMGKB : Pharmacogenomic Knowledge Base
PharmGKB Accession ID
2.16.840.1.113883.3.913
2.16.840.1.113883.3.1077
http://www.ebi.ac.uk/ipd/imgt/hla
European Bioinformatics Institute
2.16.840.1.113883.6.341
URI (all prefixed with http://hl7.org/fhir/)
Description
OID
ACME Codes for Cholesterol in Serum/Plasma: This is an example code system that includes all the ACME codes for serum/plasma cholesterol from v2.36.
ACME Codes for Cholesterol in Serum/Plasma: This is an example code system that includes all the ACME codes for serum/plasma cholesterol from v2.36.
Medication status codes: Medication Status Codes
2.16.840.1.113883.4.642.1.1379
Medication status codes: Medication Status Codes
2.16.840.1.113883.4.642.1.1380
Medication request intent: MedicationRequest Intent Codes
2.16.840.1.113883.4.642.1.1378
Medicationrequest status: MedicationRequest Status Codes
2.16.840.1.113883.4.642.1.1377
Status: The validation status of the target
2.16.840.1.113883.4.642.1.885
Code system summary example for ACME body sites
This is an example code system summary for the ACME codes for body site.
Code system summary example for ACME body sites
This is an example code system summary for the ACME codes for body site.
Task Codes: Codes indicating the type of action that is expected to be performed
2.16.840.1.113883.4.642.1.1397
FHIRVersion: All published FHIR Versions.
2.16.840.1.113883.4.642.1.1310
AbstractType: A list of the base types defined by this version of the FHIR specification - types that are defined, but for which only specializations actually are created.
AccountStatus: Indicates whether the account is available to be used.
2.16.840.1.113883.4.642.1.727
ActionCardinalityBehavior: Defines behavior for an action or a group for how many times that item may be repeated.
2.16.840.1.113883.4.642.1.808
ActionConditionKind: Defines the kinds of conditions that can appear on actions.
2.16.840.1.113883.4.642.1.816
ActionGroupingBehavior: Defines organization behavior of a group.
2.16.840.1.113883.4.642.1.800
ActionParticipantType: The type of participant for the action.
2.16.840.1.113883.4.642.1.812
ActionPrecheckBehavior: Defines selection frequency behavior for an action or group.
2.16.840.1.113883.4.642.1.806
ActionRelationshipType: Defines the types of relationships between actions.
2.16.840.1.113883.4.642.1.814
ActionRequiredBehavior: Defines expectations around whether an action or action group is required.
2.16.840.1.113883.4.642.1.804
ActionSelectionBehavior: Defines selection behavior of a group.
2.16.840.1.113883.4.642.1.802
Additional Material Codes: This value set includes sample additional material type codes.
2.16.840.1.113883.4.642.1.530
AddressType: The type of an address (physical / postal).
2.16.840.1.113883.4.642.1.70
AddressUse: The use of an address.
2.16.840.1.113883.4.642.1.68
AdministrativeGender: The gender of a person used for administrative purposes.
2.16.840.1.113883.4.642.1.2
AdverseEventActuality: Overall nature of the adverse event, e.g. real or potential.
2.16.840.1.113883.4.642.1.832
AllergyIntoleranceCategory: Category of an identified substance associated with allergies or intolerances.
2.16.840.1.113883.4.642.1.134
AllergyIntoleranceCriticality: Estimate of the potential clinical harm, or seriousness, of a reaction to an identified substance.
2.16.840.1.113883.4.642.1.130
AllergyIntoleranceType: Identification of the underlying physiological mechanism for a Reaction Risk.
2.16.840.1.113883.4.642.1.132
Gender status: This example value set defines a set of codes that can be used to indicate the current state of the animal’s reproductive organs.
2.16.840.1.113883.4.642.1.419
Animal species: This example value set defines a set of codes that can be used to indicate species of animal patients.
2.16.840.1.113883.4.642.1.421
AppointmentStatus: The free/busy status of an appointment.
2.16.840.1.113883.4.642.1.485
AssertionDirectionType: The type of direction to use for assertion.
2.16.840.1.113883.4.642.1.707
AssertionOperatorType: The type of operator to use for assertion.
2.16.840.1.113883.4.642.1.709
AssertionResponseTypes: The type of response code to use for assertion.
2.16.840.1.113883.4.642.1.711
ContractResourceAssetAvailiabilityCodes
Contract Resource Asset Availiability codes: This value set has asset availability codes.
2.16.840.1.113883.4.642.1.1296
AuditEventAction: Indicator for type of action performed during the event that generated the event.
2.16.840.1.113883.4.642.1.453
AuditEventOutcome: Indicates whether the event succeeded or failed.
2.16.840.1.113883.4.642.1.455
BindingStrength: Indication of the degree of conformance expectations associated with a binding.
2.16.840.1.113883.4.642.1.44
BundleType: Indicates the purpose of a bundle - how it is intended to be used.
2.16.840.1.113883.4.642.1.621
CapabilityStatementKind: How a capability statement is intended to be used.
2.16.840.1.113883.4.642.1.199
CarePlanActivityStatus: Codes that reflect the current state of a care plan activity within its overall life cycle.
2.16.840.1.113883.4.642.1.147
CareTeamStatus: Indicates the status of the care team.
2.16.840.1.113883.4.642.1.154
ChargeItemStatus: Codes identifying the lifecycle stage of a ChargeItem.
2.16.840.1.113883.4.642.1.847
Use: The purpose of the Claim: predetermination, preauthorization, claim.
2.16.840.1.113883.4.642.1.545
CodeSearchSupport: The degree to which the server supports the code search parameter on ValueSet, if it is supported.
2.16.840.1.113883.4.642.1.861
CodeSystemContentMode: The extent of the content of the code system (the concepts and codes it defines) are represented in a code system resource.
2.16.840.1.113883.4.642.1.783
CodeSystemHierarchyMeaning: The meaning of the hierarchy of concepts in a code system.
2.16.840.1.113883.4.642.1.785
CompartmentType: Which type a compartment definition describes.
2.16.840.1.113883.4.642.1.787
CompositionAttestationMode: The way in which a person authenticated a composition.
2.16.840.1.113883.4.642.1.239
CompositionStatus: The workflow/clinical status of the composition.
2.16.840.1.113883.4.642.1.242
ConceptMapEquivalence: The degree of equivalence between concepts.
2.16.840.1.113883.4.642.1.18
FHIR Defined Concept Properties N
A set of common concept properties for use on coded systems throughout the FHIR eco-system.
PropertyType: The type of a property value.
2.16.840.1.113883.4.642.1.781
ConceptSubsumptionOutcome: The subsumption relationship between code/Coding “A” and code/Coding “B”. There are 4 possible codes to be returned: equivalent, subsumes, subsumed-by, and not-subsumed. If the server is unable to determine the relationship between the codes/Codings, then it returns an error (i.e. an OperationOutcome).
2.16.840.1.113883.4.642.1.1239
ConceptMapGroupUnmappedMode: Defines which action to take if there is no match in the group.
2.16.840.1.113883.4.642.1.481
ConditionalDeleteStatus: A code that indicates how the server supports conditional delete.
2.16.840.1.113883.4.642.1.195
ConditionalReadStatus: A code that indicates how the server supports conditional read.
2.16.840.1.113883.4.642.1.201
ConsentDataMeaning: How a resource reference is interpreted when testing consent restrictions.
2.16.840.1.113883.4.642.1.760
ConsentProvisionType: How a rule statement is applied, such as adding additional consent or removing consent.
2.16.840.1.113883.4.642.1.758
ConsentState: Indicates the state of the consent.
2.16.840.1.113883.4.642.1.756
Performer Role Codes: This value set includes sample Performer Role codes.
2.16.840.1.113883.4.642.1.1017
ConstraintSeverity: SHALL applications comply with this constraint?
2.16.840.1.113883.4.642.1.82
ContactPointSystem: Telecommunications form for contact point.
2.16.840.1.113883.4.642.1.72
ContactPointUse: Use of contact point.
2.16.840.1.113883.4.642.1.74
ContractResourceActionStatusCodes
Contract Resource Action Status codes: This value set contract specific codes for action status.
2.16.840.1.113883.4.642.1.1304
ContractResourceAssetContextCodes
Contract Resource Asset Context codes: This value set contract specific codes for asset context.
2.16.840.1.113883.4.642.1.1298
ContractResourceAssetScopeCodes
Contract Resource Asset Scope codes: This value set contract specific codes for asset scope.
2.16.840.1.113883.4.642.1.1294
ContractResourceAssetSub-TypeCodes
Contract Resource Asset Sub-Type codes: This value set contract specific codes for asset subtype.
2.16.840.1.113883.4.642.1.1302
ContractResourceAssetTypeCodes
Contract Resource Asset Type codes: This value set contract specific codes for asset type.
2.16.840.1.113883.4.642.1.1300
ContractResourceDecisionModeCodes
Contract Resource Decision Mode codes: This value set contract specific codes for decision modes.
2.16.840.1.113883.4.642.1.1292
ContractResourceDefinitionSubtypeCodes
Contract Resource Definition Subtype codes: This value set contract specific codes for status.
2.16.840.1.113883.4.642.1.1213
ContractResourceDefinitionTypeCodes
Contract Resource Definition Type codes: This value set contract specific codes for status.
2.16.840.1.113883.4.642.1.1211
ContractResourceExpirationTypeCodes
Contract Resource Expiration Type codes: This value set contract specific codes for status.
2.16.840.1.113883.4.642.1.1215
ContractResourceLegalStateCodes
Contract Resource Legal State codes: This value set contract specific codes for status.
2.16.840.1.113883.4.642.1.1207
ContractResourcePartyRoleCodes
Contract Resource Party Role codes: This value set contract specific codes for offer party participation.
2.16.840.1.113883.4.642.1.1225
ContractResourcePublicationStatusCodes
Contract Resource Publication Status codes: This value set contract specific codes for status.
2.16.840.1.113883.4.642.1.1209
Contract Resource Scope codes: This value set contract specific codes for scope.
2.16.840.1.113883.4.642.1.1217
Contract Resource Scope codes: This value set contract specific codes for security category.
2.16.840.1.113883.4.642.1.1221
Contract Resource Scope codes: This value set contract specific codes for security classification.
2.16.840.1.113883.4.642.1.1219
ContractResourceSecurityControlCodes
Contract Resource Security Control codes: This value set contract specific codes for security control.
2.16.840.1.113883.4.642.1.1223
Contract Resource Status Codes: This value set contract specific codes for status.
2.16.840.1.113883.4.642.1.744
ContributorType: The type of contributor.
2.16.840.1.113883.4.642.1.94
DataType: A version specific list of the data types defined by the FHIR specification for use as an element type (any of the FHIR defined data types).
DaysOfWeek: The days of the week.
2.16.840.1.113883.4.642.1.513
DefinitionResourceType: A list of all the definition resource types defined in this version of the FHIR specification.
2.16.840.1.113883.4.642.1.1057
DetectedIssueSeverity: Indicates the potential degree of impact of the identified issue on the patient.
2.16.840.1.113883.4.642.1.207
Procedure Device Action Codes: Example codes indicating the change that happened to the device during the procedure. Note that these are in no way complete and might not even be appropriate for some uses.
2.16.840.1.113883.4.642.1.426
FHIRDeviceStatus: Codes representing the current status of the device - on, off, suspended, etc.
2.16.840.1.113883.4.642.1.1308
DeviceNameType: The type of name the device is referred by.
2.16.840.1.113883.4.642.1.1084
DeviceUseStatementStatus: A coded concept indicating the current status of the Device Usage.
2.16.840.1.113883.4.642.1.215
FHIRDeviceStatus: The availability status of the device.
2.16.840.1.113883.4.642.1.210
DiagnosticReportStatus: The status of the diagnostic report.
2.16.840.1.113883.4.642.1.236
DiscriminatorType: How an element value is interpreted when discrimination is evaluated.
2.16.840.1.113883.4.642.1.92
DocumentMode: Whether the application produces or consumes documents.
2.16.840.1.113883.4.642.1.187
DocumentReferenceStatus: The status of the document reference.
2.16.840.1.113883.4.642.1.8
DocumentRelationshipType: The type of relationship between documents.
2.16.840.1.113883.4.642.1.245
EligibilityRequestPurpose: A code specifying the types of information being requested.
2.16.840.1.113883.4.642.1.1183
EligibilityResponsePurpose: A code specifying the types of information being requested.
2.16.840.1.113883.4.642.1.1185
EncounterLocationStatus: The status of the location.
2.16.840.1.113883.4.642.1.263
EncounterStatus: Current state of the encounter.
2.16.840.1.113883.4.642.1.247
EndpointStatus: The status of the endpoint.
2.16.840.1.113883.4.642.1.495
EpisodeOfCareStatus: The status of the episode of care.
2.16.840.1.113883.4.642.1.665
EventCapabilityMode: The mode of a message capability statement.
2.16.840.1.113883.4.642.1.183
EventResourceType: A list of all the event resource types defined in this version of the FHIR specification.
2.16.840.1.113883.4.642.1.1061
EventStatus: Codes identifying the lifecycle stage of an event.
2.16.840.1.113883.4.642.1.110
EventTiming: Real world event relating to the schedule.
2.16.840.1.113883.4.642.1.76
Claim Item Type Codes: This value set includes sample Item Type codes.
2.16.840.1.113883.4.642.1.549
Teeth Codes: This value set includes the FDI Teeth codes.
2.16.840.1.113883.4.642.1.551
Example Onset Type (Reason) Codes: This value set includes example Onset Type codes which are used to identify the event for which the onset, starting date, is required.
2.16.840.1.113883.4.642.1.579
Oral Prostho Material type Codes: This value set includes sample Oral Prosthodontic Material type codes.
2.16.840.1.113883.4.642.1.539
Example Pharmacy Service Codes: This value set includes a smattering of Pharmacy Service codes.
2.16.840.1.113883.4.642.1.563
Example Service Modifier Codes: This value set includes sample Service Modifier codes which may support differential payment.
2.16.840.1.113883.4.642.1.573
Example Service/Product Codes: This value set includes a smattering of Service/Product codes.
2.16.840.1.113883.4.642.1.561
UDI Codes: This value set includes sample UDI codes.
2.16.840.1.113883.4.642.1.555
ExampleScenarioActorType: The type of actor - system or human.
2.16.840.1.113883.4.642.1.859
ExplanationOfBenefitStatus: A code specifying the state of the resource instance.
2.16.840.1.113883.4.642.1.619
ExposureState: Whether the results by exposure is describing the results for the primary exposure of interest (exposure) or the alternative state (exposureAlternative).
2.16.840.1.113883.4.642.1.1352
ExpressionLanguage: The media type of the expression language.
2.16.840.1.113883.4.642.1.106
ExtensionContextType: How an extension context is interpreted.
2.16.840.1.113883.4.642.1.1013
This value set includes coded concepts not well covered in any of the included valuesets.
Feeding Device Codes: Materials used or needed to feed the patient.
2.16.840.1.113883.4.642.1.962
FilterOperator: The kind of operation to perform as a part of a property based filter.
2.16.840.1.113883.4.642.1.479
Flag Priority Codes: This value set is provided as an exemplar. The value set is driven by IHE Table B.8-4: Abnormal Flags, Alert Priority.
2.16.840.1.113883.4.642.1.951
FlagStatus: Indicates whether this flag is active and needs to be displayed to a user, or whether it is no longer needed or was entered in error.
2.16.840.1.113883.4.642.1.121
FM Condition Codes: This value set includes sample Conditions codes.
2.16.840.1.113883.4.642.1.557
Financial Resource Status Codes: This value set includes Status codes.
2.16.840.1.113883.4.642.1.593
Gender identity: This example value set defines a set of codes that can be used to indicate a patient’s gender identity.
2.16.840.1.113883.4.642.1.973
GoalLifecycleStatus: Codes that reflect the current state of a goal and whether the goal is still being targeted.
2.16.840.1.113883.4.642.1.272
Goal status reason: Example codes indicating the reason for a current status. Note that these are in no way complete and might not even be appropriate for some uses.
2.16.840.1.113883.4.642.1.278
GraphCompartmentRule: How a compartment must be linked.
2.16.840.1.113883.4.642.1.281
GraphCompartmentUse: Defines how a compartment rule is used.
2.16.840.1.113883.4.642.1.283
GroupMeasure: Possible group measure aggregates (E.g. Mean, Median).
2.16.840.1.113883.4.642.1.1346
GroupType: Types of resources that are part of group.
2.16.840.1.113883.4.642.1.285
GuidanceResponseStatus: The status of a guidance response.
2.16.840.1.113883.4.642.1.818
GuidePageGeneration: A code that indicates how the page is generated.
2.16.840.1.113883.4.642.1.999
GuideParameterCode: Code of parameter that is input to the guide.
2.16.840.1.113883.4.642.1.997
FamilyHistoryStatus: A code that identifies the status of the family history record.
2.16.840.1.113883.4.642.1.268
TestScriptRequestMethodCode: The allowable request method or HTTP operation codes.
2.16.840.1.113883.4.642.1.717
HTTPVerb: HTTP verbs (in the HTTP command line). See [HTTP rfc](https://tools.ietf.org/html/rfc7231) for details.
2.16.840.1.113883.4.642.1.625
IdentifierUse: Identifies the purpose for this identifier, if known .
2.16.840.1.113883.4.642.1.58
IdentityAssuranceLevel: The level of confidence that this link represents the same actual person, based on NIST Authentication Levels.
2.16.840.1.113883.4.642.1.657
ImagingStudyStatus: The status of the ImagingStudy.
2.16.840.1.113883.4.642.1.991
Intervention Codes: This value set includes sample Intervention codes.
2.16.840.1.113883.4.642.1.533
InvoicePriceComponentType: Codes indicating the kind of the price component.
2.16.840.1.113883.4.642.1.869
InvoiceStatus: Codes identifying the lifecycle stage of an Invoice.
2.16.840.1.113883.4.642.1.867
IssueSeverity: How the issue affects the success of the action.
2.16.840.1.113883.4.642.1.409
IssueType: A code that describes the type of issue.
2.16.840.1.113883.4.642.1.411
QuestionnaireItemType: Distinguishes groups from questions and display text and indicates data type for questions.
2.16.840.1.113883.4.642.1.445
KnowledgeResourceType: A list of all the knowledge resource types defined in this version of the FHIR specification.
2.16.840.1.113883.4.642.1.1063
Language preference type: This value set defines the set of codes for describing the type or mode of the patient’s preferred language.
2.16.840.1.113883.4.642.1.1023
LinkType: The type of link between this patient resource and another patient resource.
2.16.840.1.113883.4.642.1.424
LinkageType: Used to distinguish different roles a resource can play within a set of linked resources.
2.16.840.1.113883.4.642.1.315
ListMode: The processing mode that applies to this list.
2.16.840.1.113883.4.642.1.319
ListStatus: The current state of the list.
2.16.840.1.113883.4.642.1.327
LocationMode: Indicates whether a resource instance represents a specific location or a class of locations.
2.16.840.1.113883.4.642.1.331
LocationStatus: Indicates whether the location is still in use.
2.16.840.1.113883.4.642.1.333
StructureMapContextType: How to interpret the context.
2.16.840.1.113883.4.642.1.680
StructureMapGroupTypeMode: If this is the default rule set to apply for the source type, or this combination of types.
2.16.840.1.113883.4.642.1.688
StructureMapInputMode: Mode for this instance of data.
2.16.840.1.113883.4.642.1.678
StructureMapModelMode: How the referenced structure is used in this mapping.
2.16.840.1.113883.4.642.1.676
StructureMapSourceListMode: If field is a list, how to manage the source.
2.16.840.1.113883.4.642.1.684
StructureMapTargetListMode: If field is a list, how to manage the production.
2.16.840.1.113883.4.642.1.686
StructureMapTransform: How data is copied/created.
2.16.840.1.113883.4.642.1.682
MeasureReportStatus: The status of the measure report.
2.16.840.1.113883.4.642.1.777
MeasureReportType: The type of the measure report.
2.16.840.1.113883.4.642.1.779
MessageEvent: One of the message events defined as part of this version of FHIR.
MessageSignificanceCategory: The impact of the content of a message.
2.16.840.1.113883.4.642.1.189
messageheader-response-request
messageheader-response-request: HL7-defined table of codes which identify conditions under which acknowledgments are required to be returned in response to a message.
2.16.840.1.113883.4.642.1.925
DeviceMetricCalibrationState: Describes the state of a metric calibration.
2.16.840.1.113883.4.642.1.653
DeviceMetricCalibrationType: Describes the type of a metric calibration.
2.16.840.1.113883.4.642.1.651
DeviceMetricCategory: Describes the category of the metric.
2.16.840.1.113883.4.642.1.649
DeviceMetricColor: Describes the typical color of representation.
2.16.840.1.113883.4.642.1.655
DeviceMetricOperationalStatus: Describes the operational status of the DeviceMetric.
2.16.840.1.113883.4.642.1.647
NameUse: The use of a human name.
2.16.840.1.113883.4.642.1.66
NamingSystemIdentifierType: Identifies the style of unique identifier used to identify a namespace.
2.16.840.1.113883.4.642.1.493
NamingSystemType: Identifies the purpose of the naming system.
2.16.840.1.113883.4.642.1.491
NarrativeStatus: The status of a resource narrative.
2.16.840.1.113883.4.642.1.56
AuditEventAgentNetworkType: The type of network access point of this agent in the audit event.
2.16.840.1.113883.4.642.1.457
NoteType: The presentation types of notes.
2.16.840.1.113883.4.642.1.16
ObservationRangeCategory: Codes identifying the category of observation range.
2.16.840.1.113883.4.642.1.1334
ObservationStatus: Codes providing the status of an observation.
2.16.840.1.113883.4.642.1.401
OperationKind: Whether an operation is a normal operation or a query.
2.16.840.1.113883.4.642.1.507
OperationParameterUse: Whether an operation parameter is an input or an output parameter.
2.16.840.1.113883.4.642.1.509
Organization Affiliation Role: This example value set defines a set of codes that can be used to indicate the role of one Organization in relation to another.
2.16.840.1.113883.4.642.1.881
orientationType: Type for orientation.
2.16.840.1.113883.4.642.1.988
ParticipantRequired: Is the Participant required to attend the appointment.
2.16.840.1.113883.4.642.1.489
ParticipationStatus: The Participation status of an appointment.
2.16.840.1.113883.4.642.1.487
ObservationDataType: Permitted data type for observation value.
2.16.840.1.113883.4.642.1.1332
Practitioner specialty: This example value set defines a set of codes that can be used to indicate the specialty of a Practitioner.
2.16.840.1.113883.4.642.1.442
Procedure Progress Status Codes: This value set is provided as an example. The value set to instantiate this attribute should be drawn from a robust terminology code system that consists of or contains concepts to support the procedure performance process.
2.16.840.1.113883.4.642.1.947
BiologicallyDerivedProductCategory
BiologicallyDerivedProductCategory: Biologically Derived Product Category.
2.16.840.1.113883.4.642.1.901
BiologicallyDerivedProductStatus
BiologicallyDerivedProductStatus: Biologically Derived Product Status.
2.16.840.1.113883.4.642.1.903
BiologicallyDerivedProductStorageScale
BiologicallyDerivedProductStorageScale: BiologicallyDerived Product Storage Scale.
2.16.840.1.113883.4.642.1.905
PropertyRepresentation: How a property is represented when serialized.
2.16.840.1.113883.4.642.1.88
ProvenanceEntityRole: How an entity was used in an activity.
2.16.840.1.113883.4.642.1.437
Provenance participant role: The role that a provenance participant played
2.16.840.1.113883.4.642.1.1306
PublicationStatus: The lifecycle status of an artifact.
2.16.840.1.113883.4.642.1.4
qualityType: Type for quality report.
2.16.840.1.113883.4.642.1.229
QuantityComparator: How the Quantity should be understood and represented.
2.16.840.1.113883.4.642.1.60
QuestionnaireResponseStatus: Lifecycle status of the questionnaire response.
2.16.840.1.113883.4.642.1.448
Questionnaire Text Categories: Codes defining the purpose of a Questionnaire item of type ‘text’.
2.16.840.1.113883.4.642.1.936
EnableWhenBehavior: Controls how multiple enableWhen values are interpreted - whether all or any must be true.
2.16.840.1.113883.4.642.1.1008
QuestionnaireItemOperator: The criteria by which a question is enabled.
2.16.840.1.113883.4.642.1.1006
QuestionnaireItemUIControlCodes
Questionnaire Item UI Control Codes: Starter set of user interface control/display mechanisms that might be used when rendering an item in a questionnaire.
2.16.840.1.113883.4.642.1.932
AllergyIntoleranceSeverity: Clinical assessment of the severity of a reaction event as a whole, potentially considering multiple different manifestations.
2.16.840.1.113883.4.642.1.136
SNOMEDCTReasonMedicationNotGivenCodes
SNOMED CT Reason Medication Not Given Codes: This value set includes all medication refused, medication not administered, and non-administration of necessary drug or medicine codes from SNOMED CT - provided as an exemplar value set.
2.16.840.1.113883.4.642.1.343
ReferenceHandlingPolicy: A set of flags that defines how references are supported.
2.16.840.1.113883.4.642.1.203
ReferenceVersionRules: Whether a reference needs to be version specific or version independent, or whether either can be used.
2.16.840.1.113883.4.642.1.90
RelatedArtifactType: The type of relationship to the related artifact.
2.16.840.1.113883.4.642.1.100
CatalogEntryRelationType: The type of relations between entries.
2.16.840.1.113883.4.642.1.1029
Beneficiary Relationship Codes
This value set includes the Patient to subscriber relationship codes.
2.16.840.1.113883.4.642.1.36
Claim Processing Codes: This value set includes Claim Processing Outcome codes.
2.16.840.1.113883.4.642.1.14
TestReportActionResult: The results of executing an action.
2.16.840.1.113883.4.642.1.721
TestReportParticipantType: The type of participant.
2.16.840.1.113883.4.642.1.723
TestReportResult: The reported execution result.
2.16.840.1.113883.4.642.1.719
TestReportStatus: The current status of the test report.
2.16.840.1.113883.4.642.1.725
repositoryType: Type for access of external URI.
2.16.840.1.113883.4.642.1.231
RequestIntent: Codes indicating the degree of authority/intentionality associated with a request.
2.16.840.1.113883.4.642.1.114
RequestPriority: Identifies the level of importance to be assigned to actioning the request.
2.16.840.1.113883.4.642.1.116
RequestResourceType: A list of all the request resource types defined in this version of the FHIR specification.
2.16.840.1.113883.4.642.1.1059
RequestStatus: Codes identifying the lifecycle stage of a request.
2.16.840.1.113883.4.642.1.112
ResearchElementType: The possible types of research elements (E.g. Population, Exposure, Outcome).
2.16.840.1.113883.4.642.1.1342
ResearchStudyStatus: Codes that convey the current status of the research study.
2.16.840.1.113883.4.642.1.820
ResearchSubjectStatus: Indicates the progression of a study subject through a study.
2.16.840.1.113883.4.642.1.830
AggregationMode: How resource references can be aggregated.
2.16.840.1.113883.4.642.1.86
SlicingRules: How slices are interpreted when evaluating an instance.
2.16.840.1.113883.4.642.1.84
Canonical Status Codes for FHIR Resources
The master set of status codes used throughout FHIR. All status codes are mapped to one of these codes.
ResourceType: One of the resource types defined as part of this version of FHIR.
ResourceValidationMode: Codes indicating the type of validation to perform.
2.16.840.1.113883.4.642.1.119
ResponseType: The kind of response to a message.
2.16.840.1.113883.4.642.1.381
RestfulCapabilityMode: The mode of a RESTful capability statement.
2.16.840.1.113883.4.642.1.177
The set of interactions defined by the RESTful part of the FHIR specification.
SearchComparator: What Search Comparator Codes are supported in search.
2.16.840.1.113883.4.642.1.638
SearchEntryMode: Why an entry is in the result set - whether it’s included as a match or because of an _include requirement, or to convey information or warning information about the search process.
2.16.840.1.113883.4.642.1.623
SearchModifierCode: A supported modifier for a search parameter.
2.16.840.1.113883.4.642.1.640
SearchParamType: Data types allowed to be used for search parameters.
2.16.840.1.113883.4.642.1.12
XPathUsageType: How a search parameter relates to the set of elements returned by evaluating its xpath query.
2.16.840.1.113883.4.642.1.636
Observation Category Codes: Codes to denote a guideline or policy statement.when a genetic test result is being shared as a secondary finding.
2.16.840.1.113883.4.642.1.1286
sequenceType: Type if a sequence – DNA, RNA, or amino acid sequence.
2.16.840.1.113883.4.642.1.220
ICD-10 Procedure Codes: This value set includes sample ICD-10 Procedure codes.
2.16.840.1.113883.4.642.1.575
SlotStatus: The free/busy status of the slot.
2.16.840.1.113883.4.642.1.483
SortDirection: The possible sort directions, ascending or descending.
2.16.840.1.113883.4.642.1.980
SPDXLicense: The license that applies to an Implementation Guide (using an SPDX license Identifiers, or ‘not-open-source’). The binding is required but new SPDX license Identifiers are allowed to be used (https://spdx.org/licenses/).
2.16.840.1.113883.4.642.1.1027
SpecimenContainedPreference: Degree of preference of a type of conditioned specimen.
2.16.840.1.113883.4.642.1.853
SpecimenStatus: Codes providing the status/availability of a specimen.
2.16.840.1.113883.4.642.1.472
strandType: Type for strand.
2.16.840.1.113883.4.642.1.986
StructureDefinitionKind: Defines the type of structure that a definition is describing.
2.16.840.1.113883.4.642.1.669
SubscriptionChannelType: The type of method used to execute a subscription.
2.16.840.1.113883.4.642.1.501
SubscriptionStatus: The status of a subscription.
2.16.840.1.113883.4.642.1.503
FHIRSubstanceStatus: A code to indicate if the substance is actively used.
2.16.840.1.113883.4.642.1.475
SupplyDeliveryStatus: Status of the supply delivery.
2.16.840.1.113883.4.642.1.701
SupplyRequestStatus: Status of the supply request.
2.16.840.1.113883.4.642.1.696
TaskIntent: Distinguishes whether the task is a proposal, plan or full order.
2.16.840.1.113883.4.642.1.1241
TaskStatus: The current status of the task.
2.16.840.1.113883.4.642.1.791
TransactionMode: A code that indicates how transactions are supported.
2.16.840.1.113883.4.642.1.193
TriggerType: The type of trigger.
2.16.840.1.113883.4.642.1.104
TypeDerivationRule: How a type relates to its baseDefinition.
2.16.840.1.113883.4.642.1.674
UDIEntryType: Codes to identify how UDI data was entered.
2.16.840.1.113883.4.642.1.212
UnknownContentCode: A code that indicates whether an application accepts unknown elements or extensions when reading resources.
2.16.840.1.113883.4.642.1.197
EvidenceVariableType: The possible types of variables for exposures or outcomes (E.g. Dichotomous, Continuous, Descriptive).
2.16.840.1.113883.4.642.1.1344
ResourceVersionPolicy: How the system supports versioning for a resource.
2.16.840.1.113883.4.642.1.191
VisionBase: A coded concept listing the base codes.
2.16.840.1.113883.4.642.1.663
VisionEyes: A coded concept listing the eye codes.
2.16.840.1.113883.4.642.1.661
This value set includes W3C PROV Data Model Activity concepts, which are treated as codes in this valueset. Some adaptations were made to make these concepts suitable values for the Provenance.activity element. Coded concepts are from PROV-DM and the display names are their counterparts in PROV-N (human readable notation syntax specification).[code system OID: http://www.w3.org/TR/2013/REC-prov-dm-20130430/ and http://www.w3.org/TR/2013/REC-prov-n-20130430/\]
URI (all prefixed with http://terminology.hl7.org/CodeSystem/)
Description
OID
Surface Codes: This value set includes a smattering of FDI tooth surface codes.
2.16.840.1.113883.4.642.1.1154
ActionType: The type of action to be performed.
2.16.840.1.113883.4.642.1.1246
ActivityDefinitionCategory: High-level categorization of the type of activity.
2.16.840.1.113883.4.642.1.1243
Adjudication Value Codes: This value set includes a smattering of Adjudication Value codes which includes codes to indicate the amounts eligible under the plan, the amount of benefit, copays etc.
2.16.840.1.113883.4.642.1.1171
This value set includes a smattering of adjudication codes.
2.16.840.1.113883.4.642.1.1053
Adjudication Reason Codes: This value set includes smattering of Adjudication Reason codes.
2.16.840.1.113883.4.642.1.1172
Admit source: This value set defines a set of codes that can be used to indicate from where the patient came in.
2.16.840.1.113883.4.642.1.1092
AdverseEventCategory: Overall categorization of the event, e.g. product-related or situational.
2.16.840.1.113883.4.642.1.1251
AdverseEventCausalityAssessment
AdverseEventCausalityAssessment: Codes for the assessment of whether the entity caused the event.
2.16.840.1.113883.4.642.1.1254
AdverseEventCausalityMethod: TODO.
2.16.840.1.113883.4.642.1.1255
AdverseEventOutcome: TODO (and should this be required?).
2.16.840.1.113883.4.642.1.1252
AdverseEventSeriousness: Overall seriousness of this event for the patient.
2.16.840.1.113883.4.642.1.1253
AdverseEventSeverity: The severity of the adverse event itself, in direct relation to the subject.
2.16.840.1.113883.4.642.1.1256
AllergyIntoleranceSubstanceExposureRisk
AllergyIntoleranceSubstanceExposureRisk: The risk of an adverse reaction (allergy or intolerance) for this patient upon exposure to the substance (including pharmaceutical products).
2.16.840.1.113883.4.642.1.1275
AllergyIntoleranceClinicalStatusCodes
AllergyIntolerance Clinical Status Codes: Preferred value set for AllergyIntolerance Clinical Status.
2.16.840.1.113883.4.642.1.1373
AllergyIntoleranceVerificationStatusCodes
AllergyIntolerance Verification Status Codes: Preferred value set for AllergyIntolerance Verification Status.
2.16.840.1.113883.4.642.1.1371
Benefit cost applicability: Whether the cost applies to in-network or out-of-network providers.
2.16.840.1.113883.4.642.1.0
Appointment cancellation reason: This example value set defines a set of reasons for the cancellation of an appointment.
2.16.840.1.113883.4.642.1.1382
Audit event entity type: Code for the entity type involved in the audit event.
2.16.840.1.113883.4.642.1.1134
Audit Event ID: Event Types for Audit Events - defined by DICOM with some FHIR specific additions.
2.16.840.1.113883.4.642.1.1136
Basic Resource Types: This value set defines codes for resources not yet supported by (or which will never be supported by) FHIR. Many of the codes listed here will eventually be turned into official resources. However, there is no guarantee that any particular resource will be created nor that the scope will be exactly as defined by the codes presented here. Codes in this set will be deprecated if/when formal resources are defined that encompass these concepts.
2.16.840.1.113883.4.642.1.1072
Network Type Codes: This value set includes a smattering of Network type codes.
2.16.840.1.113883.4.642.1.1177
Benefit Term Codes: This value set includes a smattering of Benefit Term codes.
2.16.840.1.113883.4.642.1.1179
Benefit Type Codes: This value set includes a smattering of Benefit type codes.
2.16.840.1.113883.4.642.1.1176
Unit Type Codes: This value set includes a smattering of Unit type codes.
2.16.840.1.113883.4.642.1.1178
Can-push-updates: Ability of the primary source to push updates/alerts
2.16.840.1.113883.4.642.1.897
CatalogType: The type of catalog.
2.16.840.1.113883.4.642.1.1288
CertaintySubcomponentRating: The quality rating of the subcomponent of a quality of evidence rating.
2.16.840.1.113883.4.642.1.1362
CertaintySubcomponentType: The subcomponent classification of quality of evidence rating systems.
2.16.840.1.113883.4.642.1.1360
ChargeItemCode: Example set of codes that can be used for billing purposes.
2.16.840.1.113883.4.642.1.1257
ChoiceListOrientation: Direction in which lists of possible answers should be displayed.
2.16.840.1.113883.4.642.1.1273
chromosome-human: Chromosome number for human.
2.16.840.1.113883.4.642.1.1086
Exception Codes: This value set includes sample Exception codes.
2.16.840.1.113883.4.642.1.1162
Claim Type Codes: This value set includes Claim Type codes.
2.16.840.1.113883.4.642.1.1156
Claim Care Team Role Codes: This value set includes sample Claim Care Team Role codes.
2.16.840.1.113883.4.642.1.1165
Claim Information Category Codes: This value set includes sample Information Category codes.
2.16.840.1.113883.4.642.1.1163
AlternativeCodeKind: Indicates the type of use for which the code is defined.
2.16.840.1.113883.4.642.1.1284
Common Tags: Common Tag Codes defined by FHIR project
2.16.840.1.113883.4.642.1.1067
CommunicationCategory: Codes for general categories of communications such as alerts, instructions, etc.
2.16.840.1.113883.4.642.1.1076
CommunicationNotDoneReason: Codes for the reason why a communication did not happen.
2.16.840.1.113883.4.642.1.1077
CommunicationTopic: Codes describing the purpose or content of the communication.
2.16.840.1.113883.4.642.1.1078
CompositeMeasureScoring: The composite scoring method of the measure.
2.16.840.1.113883.4.642.1.1235
AlternativeCodeKind: Indicates the type of use for which the code is defined.
2.16.840.1.113883.4.642.1.1406
Condition Category Codes: Preferred value set for Condition Categories.
2.16.840.1.113883.4.642.1.1073
Condition Clinical Status Codes: Preferred value set for Condition Clinical Status.
2.16.840.1.113883.4.642.1.1074
ConditionState: Enumeration indicating whether the condition is currently active, inactive, or has been resolved.
2.16.840.1.113883.4.642.1.1287
ConditionVerificationStatus: The verification status to support or decline the clinical status of the condition or diagnosis.
2.16.840.1.113883.4.642.1.1075
ConformanceExpectation: Indicates the degree of adherence to a specified behavior or capability expected for a system to be deemed conformant with a specification.
2.16.840.1.113883.4.642.1.1271
Consent Action Codes: This value set includes sample Consent Action codes.
2.16.840.1.113883.4.642.1.1227
Consent Category Codes: This value set includes sample Consent Directive Type codes, including several consent directive related LOINC codes; HL7 VALUE SET: ActConsentType(2.16.840.1.113883.1.11.19897); examples of US realm consent directive legal descriptions and references to online and/or downloadable forms such as the SSA-827 Authorization to Disclose Information to the Social Security Administration; and other anticipated consent directives related to participation in a clinical trial, medical procedures, reproductive procedures; health care directive (Living Will); advance directive, do not resuscitate (DNR); Physician Orders for Life-Sustaining Treatment (POLST)
2.16.840.1.113883.4.642.1.1226
Consent PolicyRule Codes: This value set includes sample Regulatory consent policy types from the US and other regions.
2.16.840.1.113883.4.642.1.1229
Consent Scope Codes: This value set includes the four Consent scope codes.
2.16.840.1.113883.4.642.1.1228
Contact entity type: This example value set defines a set of codes that can be used to indicate the purpose for which you would contact a contact party.
2.16.840.1.113883.4.642.1.1129
ContainerCap: Color of the container cap.
2.16.840.1.113883.4.642.1.1258
ContractContentDerivationCodes
Contract Content Derivation Codes: This is an example set of Content Derivative type codes, which represent the minimal content derived from the basal information source at a specific stage in its lifecycle, which is sufficient to manage that source information, for example, in a repository, registry, processes and workflows, for making access control decisions, and providing query responses.
2.16.840.1.113883.4.642.1.1204
ContractDataMeaning: How a resource reference is interpreted when evaluating contract offers.
2.16.840.1.113883.4.642.1.1205
Contract Type Codes: This value set includes sample Contract Type codes.
2.16.840.1.113883.4.642.1.1330
Contract Action Codes: This value set includes sample Contract Action codes.
2.16.840.1.113883.4.642.1.1202
Contract Actor Role Codes: This value set includes sample Contract Actor Role codes.
2.16.840.1.113883.4.642.1.1203
Contract Signer Type Codes: This value set includes sample Contract Signer Type codes.
2.16.840.1.113883.4.642.1.1201
Contract Subtype Codes: This value set includes sample Contract Subtype codes.
2.16.840.1.113883.4.642.1.1198
Contract Term Subtype Codes: This value set includes sample Contract Term SubType codes.
2.16.840.1.113883.4.642.1.1200
Contract Term Type Codes: This value set includes sample Contract Term Type codes.
2.16.840.1.113883.4.642.1.1199
CopyNumberEvent: Copy Number Event.
2.16.840.1.113883.4.642.1.1087
Coverage Class Codes: This value set includes Coverage Class codes.
2.16.840.1.113883.4.642.1.1147
Coverage Copay Type Codes: This value set includes sample Coverage Copayment Type codes.
2.16.840.1.113883.4.642.1.1149
Coverage SelfPay Codes: This value set includes Coverage SelfPay codes.
2.16.840.1.113883.4.642.1.1148
CoverageEligibilityResponseAuthSupportCodes
CoverageEligibilityResponse Auth Support Codes: This value set includes CoverageEligibilityResponse Auth Support codes.
2.16.840.1.113883.4.642.1.1394
DataAbsentReason: Used to specify why the normally expected content of the data element is missing.
2.16.840.1.113883.4.642.1.1048
DefinitionStatus: Codes identifying the lifecycle stage of a definition.
2.16.840.1.113883.4.642.1.1070
DefinitionTopic: High-level categorization of the definition, used for searching, sorting, and filtering.
2.16.840.1.113883.4.642.1.1244
Structure Definition Use Codes / Keywords: Structure Definition Use Codes / Keywords
2.16.840.1.113883.4.642.1.1191
FHIRDeviceStatusReason: The availability status reason of the device.
2.16.840.1.113883.4.642.1.1082
This value set defines a set of codes that can be used to express the role of a diagnosis on the Encounter or EpisodeOfCare record.
2.16.840.1.113883.4.642.1.1054
DICOM Audit Message Record Lifecycle Events
Attached is vocabulary for the record lifecycle events, as per DICOM Audit Message,
Diet: This value set defines a set of codes that can be used to indicate dietary preferences or restrictions a patient may have.
2.16.840.1.113883.4.642.1.1091
Discharge disposition: This value set defines a set of codes that can be used to where the patient left the hospital.
2.16.840.1.113883.4.642.1.1093
DoseAndRateType: The kind of dose or rate specified.
2.16.840.1.113883.4.642.1.1069
EffectEstimateType: Whether the effect estimate is an absolute effect estimate (absolute difference) or a relative effect estimate (relative difference), and the specific type of effect estimate (eg relative risk or median difference).
2.16.840.1.113883.4.642.1.1356
Special arrangements: This value set defines a set of codes that can be used to indicate the kinds of special arrangements in place for a patients visit.
2.16.840.1.113883.4.642.1.1090
Encounter type: This example value set defines a set of codes that can be used to indicate the type of encounter: a specific code indicating type of service provided.
2.16.840.1.113883.4.642.1.1088
Endpoint Connection Type: This is an example value set defined by the FHIR project, that could be used to represent possible connection type profile values.
2.16.840.1.113883.4.642.1.1140
Endpoint Payload Type: This is an example value set defined by the FHIR project, that could be used to represent possible payload document types.
2.16.840.1.113883.4.642.1.1139
EnteralFormulaAdditiveTypeCode
Enteral Formula Additive Type Code: EnteralFormulaAdditiveType: Codes for the type of modular component such as protein, carbohydrate or fiber to be provided in addition to or mixed with the base formula. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1123
Episode of care type: This example value set defines a set of codes that can be used to express the usage type of an EpisodeOfCare record.
2.16.840.1.113883.4.642.1.1189
QualityOfEvidenceRating: A rating system that describes the quality of evidence such as the GRADE, DynaMed, or Oxford CEBM systems.
2.16.840.1.113883.4.642.1.1267
EvidenceVariantState: Used for results by exposure in variant states such as low-risk, medium-risk and high-risk states.
2.16.840.1.113883.4.642.1.1354
USCLS Codes: This value set includes a smattering of USCLS codes.
2.16.840.1.113883.4.642.1.1153
Benefit Category Codes: This value set includes examples of Benefit Category codes.
2.16.840.1.113883.4.642.1.1175
Example Claim SubType Codes: This value set includes sample Claim SubType codes which are used to distinguish the claim types for example within type institutional there may be subtypes for emergency services, bed stay and transportation.
2.16.840.1.113883.4.642.1.1158
ExampleCoverageFinancialExceptionCodes
Example Coverage Financial Exception Codes: This value set includes Example Coverage Financial Exception Codes.
2.16.840.1.113883.4.642.1.1329
ExampleDiagnosisOnAdmissionCodes
Example Diagnosis on Admission Codes: This value set includes example Diagnosis on Admission codes.
2.16.840.1.113883.4.642.1.1170
ExampleDiagnosisRelatedGroupCodes
Example Diagnosis Related Group Codes: This value set includes example Diagnosis Related Group codes.
2.16.840.1.113883.4.642.1.1166
Example Diagnosis Type Codes: This value set includes example Diagnosis Type codes.
2.16.840.1.113883.4.642.1.1167
ClaimPayeeResourceType: The type of Claim payee Resource.
2.16.840.1.113883.4.642.1.1164
Example Payment Type Codes: This value set includes example Payment Type codes.
2.16.840.1.113883.4.642.1.1181
Example Procedure Type Codes: This value set includes example Procedure Type codes.
2.16.840.1.113883.4.642.1.1388
Example Program Reason Codes: This value set includes sample Program Reason Span codes.
2.16.840.1.113883.4.642.1.1161
ExampleProviderQualificationCodes
Example Provider Qualification Codes: This value set includes sample Provider Qualification codes.
2.16.840.1.113883.4.642.1.1160
ExampleRelatedClaimRelationshipCodes
Example Related Claim Relationship Codes: This value set includes sample Related Claim Relationship codes.
2.16.840.1.113883.4.642.1.1159
Example Revenue Center Codes: This value set includes sample Revenue Center codes.
2.16.840.1.113883.4.642.1.1168
Example Service Place Codes: This value set includes a smattering of Service Place codes.
2.16.840.1.113883.4.642.1.1157
Oral Site Codes: This value set includes a smattering of FDI oral site codes.
2.16.840.1.113883.4.642.1.1152
ExampleVisionPrescriptionProductCodes
Example Vision Prescription Product Codes: This value set includes a smattering of Prescription Product codes.
2.16.840.1.113883.4.642.1.1188
ExpansionParameterSource: Declares what the source of a parameter is.
2.16.840.1.113883.4.642.1.1279
ExpansionProcessingRule: Defines how concepts are processed into the expansion when it’s for UI presentation.
2.16.840.1.113883.4.642.1.1281
This CodeSystem contains Additional FHIR-defined Security Role types not defined elsewhere
Failure-action: The result if validation fails
2.16.840.1.113883.4.642.1.891
Financial Task Codes: This value set includes Financial Task codes.
2.16.840.1.113883.4.642.1.1390
Financial Task Input Type Codes: This value set includes Financial Task Input Type codes.
2.16.840.1.113883.4.642.1.1392
Flag Category: Example list of general categories for flagged issues. (Not complete or necessarily appropriate.)
2.16.840.1.113883.4.642.1.1071
This value set includes a sample set of Forms codes.
2.16.840.1.113883.4.642.1.1052
This value set includes sample funds reservation type codes.
2.16.840.1.113883.4.642.1.1051
GoalAcceptanceStatus: Codes indicating whether the goal has been accepted by a stakeholder.
2.16.840.1.113883.4.642.1.1270
Goal achievement status: Describes the progression, or lack thereof, towards the goal against the target.
2.16.840.1.113883.4.642.1.1375
Goal category: Example codes for grouping goals to use for filtering or presentation.
2.16.840.1.113883.4.642.1.1097
Goal priority: Indicates the level of importance associated with reaching or sustaining a goal.
2.16.840.1.113883.4.642.1.1096
GoalRelationshipType: Types of relationships between two goals.
2.16.840.1.113883.4.642.1.1269
HandlingConditionSet: Set of handling instructions prior testing of the specimen.
2.16.840.1.113883.4.642.1.1259
FamilyHistoryAbsentReason: Codes describing the reason why a family member’s history is not available.
2.16.840.1.113883.4.642.1.1094
HL7Workgroup: An HL7 administrative unit that owns artifacts in the FHIR specification.
2.16.840.1.113883.4.642.1.1277
ImmunizationEvaluationDoseStatusCodes
Immunization Evaluation Dose Status codes: The value set to instantiate this attribute should be drawn from a terminologically robust code system that consists of or contains concepts to support describing the validity of a dose relative to a particular recommended schedule. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1102
ImmunizationEvaluationDoseStatusReasonCodes
Immunization Evaluation Dose Status Reason codes: The value set to instantiate this attribute should be drawn from a terminologically robust code system that consists of or contains concepts to support describing the reason why an administered dose has been assigned a particular status. Often, this reason describes why a dose is considered invalid. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1103
Immunization Funding Source: The value set to instantiate this attribute should be drawn from a terminologically robust code system that consists of or contains concepts to support describing the source of the vaccine administered. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1100
Immunization Origin Codes: The value set to instantiate this attribute should be drawn from a terminologically robust code system that consists of or contains concepts to support describing the source of the data when the report of the immunization event is not based on information from the person, entity or organization who administered the vaccine. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1101
ImmunizationProgramEligibility
Immunization Program Eligibility: The value set to instantiate this attribute should be drawn from a terminologically robust code system that consists of or contains concepts to support describing the patient’s eligibility for a vaccination program. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1099
ImmunizationRecommendationStatusCodes
Immunization Recommendation Status Codes: The value set to instantiate this attribute should be drawn from a terminologically robust code system that consists of or contains concepts to support describing the status of the patient towards perceived immunity against a vaccine preventable disease. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1104
Immunization Subpotent Reason: The value set to instantiate this attribute should be drawn from a terminologically robust code system that consists of or contains concepts to support describing the reason why a dose is considered to be subpotent. This value set is provided as a suggestive example.
2.16.840.1.113883.4.642.1.1098
Implant Status: A set codes that define the functional status of an implanted device.
2.16.840.1.113883.4.642.1.1283
Insurance plan type: This example value set defines a set of codes that can be used to indicate a type of insurance plan.
2.16.840.1.113883.4.642.1.1261
ISO 21089-2017 Health Record Lifecycle Events
Attached is vocabulary for the 27 record lifecycle events, as per ISO TS 21089-2017, Health Informatics - Trusted End-to-End Information Flows, Section 3, Terms and Definitions (2017, at ISO Central Secretariat, passed ballot and ready for publication). This will also be included in the FHIR EHR Record Lifecycle Event Implementation Guide, balloted and (to be) published with FHIR STU-3.
LibraryType: The type of knowledge asset this library contains.
2.16.840.1.113883.4.642.1.1230
List Empty Reasons: General reasons for a list to be empty. Reasons are either related to a summary list (i.e. problem or medication list) or to a workflow related list (i.e. consultation list).
2.16.840.1.113883.4.642.1.1106
Example Use Codes for List: Example use codes for the List resource - typical kinds of use.
2.16.840.1.113883.4.642.1.1105
List Order Codes: Base values for the order of the items in a list resource.
2.16.840.1.113883.4.642.1.1107
Location type: This example value set defines a set of codes that can be used to indicate the physical form of the Location.
2.16.840.1.113883.4.642.1.1108
MatchGrade: A Master Patient Index (MPI) assessment of whether a candidate patient record is a match or not.
2.16.840.1.113883.4.642.1.1289
MeasureDataUsage: The intended usage for supplemental data elements in the measure.
2.16.840.1.113883.4.642.1.1234
MeasureImprovementNotation: Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.
2.16.840.1.113883.4.642.1.1395
MeasurePopulationType: The type of population.
2.16.840.1.113883.4.642.1.1231
MeasureScoring: The scoring type of the measure.
2.16.840.1.113883.4.642.1.1232
MeasureType: The type of measure (includes codes from 2.16.840.1.113883.1.11.20368).
2.16.840.1.113883.4.642.1.1233
MedicationAdministration Performer Function Codes
Medication administration performer function codes: MedicationAdministration Performer Function Codes
2.16.840.1.113883.4.642.1.1112
Media Modality: Detailed information about the type of the image - its kind, purpose, or the kind of equipment used to generate it.
2.16.840.1.113883.4.642.1.1109
Media Type: Codes for high level media categories.
2.16.840.1.113883.4.642.1.326
MedicationAdministration Category Codes
Medication administration category codes: MedicationAdministration Category Codes
2.16.840.1.113883.4.642.1.1111
MedicationAdministration Status Codes
Medication administration status codes: MedicationAdministration Status Codes
2.16.840.1.113883.4.642.1.1311
Medication status codes: Medication Status Codes
2.16.840.1.113883.4.642.1.1120
MedicationDispense Performer Function Codes
Medication dispense performer function codes: MedicationDispense Performer Function Codes
2.16.840.1.113883.4.642.1.1319
MedicationDispense Status Codes
Medication dispense status codes: MedicationDispense Status Codes
2.16.840.1.113883.4.642.1.1313
medicationKnowledge Characteristic Codes
Medication knowledge characteristic codes: MedicationKnowledge Characteristic Codes
2.16.840.1.113883.4.642.1.1338
medicationKnowledge Package Type Codes
Medication knowledge package type codes: MedicationKnowledge Package Type Codes
2.16.840.1.113883.4.642.1.1340
MedicationKnowledge Status Codes
Medication knowledge status codes: MedicationKnowledge Status Codes
2.16.840.1.113883.4.642.1.1336
medicationRequest Category Codes
Medication request category codes: MedicationRequest Category Codes
2.16.840.1.113883.4.642.1.1323
medicationRequest Course of Therapy Codes
Medication request course of therapy codes: MedicationRequest Course of Therapy Codes
2.16.840.1.113883.4.642.1.1327
medicationRequest Status Reason Codes
Medication request status reason codes: MedicationRequest Status Reason Codes
2.16.840.1.113883.4.642.1.1325
Example Message Reason Codes: Example Message Reasons. These are the set of codes that might be used an updating an encounter using admin-update.
2.16.840.1.113883.4.642.1.1122
MessageTransport: The protocol used for message transport.
2.16.840.1.113883.4.642.1.1080
Missing Tooth Reason Codes: This value set includes sample Missing Tooth Reason codes.
2.16.840.1.113883.4.642.1.1150
Modifier type Codes: This value set includes sample Modifier type codes.
2.16.840.1.113883.4.642.1.1151
HumanNameAssemblyOrder: A code that represents the preferred display order of the components of a human name.
2.16.840.1.113883.4.642.1.1266
Need: The frequency with which the target must be validated
2.16.840.1.113883.4.642.1.883
AuditEventEntityRole: Code representing the role the entity played in the audit event.
2.16.840.1.113883.4.642.1.1135
Observation Category Codes: Observation Category codes.
2.16.840.1.113883.4.642.1.1125
StatisticsCode: The statistical operation parameter -“statistic” codes.
2.16.840.1.113883.4.642.1.1126
Operation Outcome Codes: Operation Outcome codes used by FHIR test servers (see Implementation file translations.xml)
2.16.840.1.113883.4.642.1.1127
Organization type: This example value set defines a set of codes that can be used to indicate a type of organization.
2.16.840.1.113883.4.642.1.1128
DeviceDefinitionParameterGroup
DeviceDefinitionParameterGroup: Codes identifying groupings of parameters; e.g. Cardiovascular.
2.16.840.1.113883.4.642.1.1264
Participant type: This value set defines a set of codes that can be used to indicate how an individual participates in an encounter.
2.16.840.1.113883.4.642.1.1089
This value set includes sample Payee Type codes.
2.16.840.1.113883.4.642.1.1050
Payment Adjustment Reason Codes: This value set includes smattering of Payment Adjustment Reason codes.
2.16.840.1.113883.4.642.1.1173
Payment Type Codes: This value set includes sample Payment Type codes.
2.16.840.1.113883.4.642.1.1186
Payment Status Codes: This value set includes a sample set of Payment Status codes.
2.16.840.1.113883.4.642.1.1187
PlanDefinitionType: The type of PlanDefinition.
2.16.840.1.113883.4.642.1.1245
Practitioner role: This example value set defines a set of codes that can be used to indicate the role of a Practitioner.
2.16.840.1.113883.4.642.1.1132
PrecisionEstimateType: Method of reporting variability of estimates, such as confidence intervals, interquartile range or standard deviation.
2.16.840.1.113883.4.642.1.1358
Primary-source-type: Type of the validation primary source
2.16.840.1.113883.4.642.1.893
Process Priority Codes: This value set includes the financial processing priority codes.
2.16.840.1.113883.4.642.1.1155
Program: This value set defines an example set of codes that could be can be used to classify groupings of service-types/specialties.
2.16.840.1.113883.4.642.1.1384
Provenance participant type: The type of participation a provenance participant.
2.16.840.1.113883.4.642.1.1131
Push-type-available: Type of alerts/updates the primary source can send
2.16.840.1.113883.4.642.1.899
MaxOccurs: Flags an element as having unlimited repetitions.
2.16.840.1.113883.4.642.1.1272
QuestionnaireItemUsageMode: Identifies the modes of usage of a questionnaire that should enable a particular questionnaire item.
2.16.840.1.113883.4.642.1.1274
AllergyIntoleranceCertainty: Statement about the degree of clinical certainty that a specific substance was the cause of the manifestation in a reaction event.
2.16.840.1.113883.4.642.1.1276
Reason Medication Given Codes: This value set is provided as an example. The value set to instantiate this attribute should be drawn from a robust terminology code system that consists of or contains concepts to support the medication process.
2.16.840.1.113883.4.642.1.1110
StrengthOfRecommendationRating
StrengthOfRecommendationRating: A rating system that describes the strength of the recommendation, such as the GRADE, DynaMed, or HGPS systems.
2.16.840.1.113883.4.642.1.1268
ObservationReferenceRangeMeaningCodes
Observation Reference Range Meaning Codes: This value set defines a set of codes that can be used to indicate the meaning/use of a reference range for a particular target population.
2.16.840.1.113883.4.642.1.1124
RejectionCriterion: Criterion for rejection of the specimen by laboratory.
2.16.840.1.113883.4.642.1.1260
ResearchStudyObjectiveType: Codes for the kind of study objective.
2.16.840.1.113883.4.642.1.1248
ResearchStudyPhase: Codes for the stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.
2.16.840.1.113883.4.642.1.1247
ResearchStudyPrimaryPurposeType
ResearchStudyPrimaryPurposeType: Codes for the main intent of the study.
2.16.840.1.113883.4.642.1.1250
ResearchStudyReasonStopped: Codes for why the study ended prematurely.
2.16.840.1.113883.4.642.1.1249
ResourceSecurityCategory: Provides general guidance around the kind of access Control to Read, Search, Create, Update, or Delete a resource.
2.16.840.1.113883.4.642.1.1404
PayeeResourceType: The type of payee Resource.
2.16.840.1.113883.4.642.1.1180
RestfulSecurityService: Types of security services used with FHIR.
2.16.840.1.113883.4.642.1.1079
RiskEstimateType: Whether the risk estimate is dichotomous, continuous or qualitative and the specific type of risk estimate (eg proportion or median).
2.16.840.1.113883.4.642.1.1364
Risk Probability: Codes representing the likelihood of a particular outcome in a risk assessment.
2.16.840.1.113883.4.642.1.1133
Audit Event Source Type: The type of process where the audit event originated from.
2.16.840.1.113883.4.642.1.1137
Service category: This value set defines an example set of codes that can be used to classify groupings of service-types/specialties.
2.16.840.1.113883.4.642.1.1144
ServiceProvisionConditions: The code(s) that detail the conditions under which the healthcare service is available/offered.
2.16.840.1.113883.4.642.1.1143
ReferralMethod: The methods of referral can be used when referring to a specific HealthCareService resource.
2.16.840.1.113883.4.642.1.1142
Service type: This value set defines an example set of codes of service-types.
2.16.840.1.113883.4.642.1.1145
SmartCapabilities: Codes that define what the server is capable of.
2.16.840.1.113883.4.642.1.1265
SpecialValues: A set of generally useful codes defined so they can be included in value sets.
2.16.840.1.113883.4.642.1.1049
StandardsStatus: HL7 Ballot/Standards status of artifact.
2.16.840.1.113883.4.642.1.1366
StudyType: Types of research studies (types of research methods).
2.16.840.1.113883.4.642.1.1350
SubscriberPolicyholder Relationship Codes: This value set includes codes for the relationship between the Subscriber and the Beneficiary (insured/covered party/patient).
2.16.840.1.113883.4.642.1.1386
SubscriptionTag: Tags to put on a resource after subscriptions have been sent.
2.16.840.1.113883.4.642.1.1141
Substance Category Codes: Substance category codes
2.16.840.1.113883.4.642.1.1138
Supply Item Type: This value sets refers to a specific supply item.
2.16.840.1.113883.4.642.1.1194
Supply Type: This value sets refers to a Category of supply.
2.16.840.1.113883.4.642.1.1192
SupplyRequestReason: The reason why the supply item was requested.
2.16.840.1.113883.4.642.1.1193
SynthesisType: Types of combining results from a body of evidence (eg. summary data meta-analysis).
2.16.840.1.113883.4.642.1.1348
Test script operation code: This value set defines a set of codes that are used to indicate the supported operations of a testing engine or tool.
2.16.840.1.113883.4.642.1.1195
TestScriptProfileDestinationType
Test script profile destination type: This value set defines a set of codes that are used to indicate the profile type of a test system when acting as the destination within a TestScript.
2.16.840.1.113883.4.642.1.1197
Test script profile origin type: This value set defines a set of codes that are used to indicate the profile type of a test system when acting as the origin within a TestScript.
2.16.840.1.113883.4.642.1.1196
UsageContextType: A code that specifies a type of context being specified by a usage context.
2.16.840.1.113883.4.642.1.1068
Validation-process: The primary process by which the target is validated
2.16.840.1.113883.4.642.1.889
Validation-status: Status of the validation of the target against the primary source
2.16.840.1.113883.4.642.1.895
Validation-type: What the target is validated against
2.16.840.1.113883.4.642.1.887
sequenceStatus: Codes providing the status of the variant test result.
2.16.840.1.113883.4.642.1.1085
verificationresult-communication-method
VerificationResult Communication Method: Attested information may be validated by process that are manual or automated. For automated processes it may accomplished by the system of record reaching out through another system’s API or information may be sent to the system of record. This value set defines a set of codes to describing the process, the how, a resource or data element is validated.
2.16.840.1.113883.4.642.1.1402
Name (URI = http://terminology.hl7.org/CodeSystem/v3-...)
Description
OID
The codes identify the conditions under which accept acknowledgements are required to be returned in response to this message. Note that accept acknowledgement address two different issues at the same time: reliable transport as well as syntactical correctness
2.16.840.1.113883.5.1050
OpenIssue: Missing description.
2.16.840.1.113883.5.1100
A code identifying the specific message to be provided. Discussion: A textual value may be specified as the print name, or for non-coded messages, as the original text. Examples: ‘Required attribute xxx is missing’, ‘System will be unavailable March 19 from 0100 to 0300’
2.16.840.1.113883.5.1082
This attribute contains an acknowledgement code as described in the HL7 message processing rules. OpenIssue: Description was copied from attribute and needs to be improved to be appropriate for a code system.
2.16.840.1.113883.5.18
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.6
A code specifying the particular kind of Act that the Act-instance represents within its class. Constraints: The kind of Act (e.g. physical examination, serum potassium, inpatient encounter, charge financial transaction, etc.) is specified with a code from one of several, typically external, coding systems. The coding system will depend on the class of Act, such as LOINC for observations, etc. Conceptually, the Act.code must be a specialization of the Act.classCode. This is why the structure of ActClass domain should be reflected in the superstructure of the ActCode domain and then individual codes or externally referenced vocabularies subordinated under these domains that reflect the ActClass structure. Act.classCode and Act.code are not modifiers of each other but the Act.code concept should really imply the Act.classCode concept. For a negative example, it is not appropriate to use an Act.code “potassium” together with and Act.classCode for “laboratory observation” to somehow mean “potassium laboratory observation” and then use the same Act.code for “potassium” together with Act.classCode for “medication” to mean “substitution of potassium”. This mutually modifying use of Act.code and Act.classCode is not permitted.
2.16.840.1.113883.5.4
A qualitative measure of the degree of exposure to the causative agent. This includes concepts such as “low”, “medium” and “high”. This quantifies how the quantity that was available to be administered to the target differs from typical or background levels of the substance.
2.16.840.1.113883.5.1114
Processing consideration and clarification codes.
2.16.840.1.113883.5.1051
OpenIssue: In Ballot 2009May, a strong Negative vote was lodged against several of the concept definitions in the vocabulary used for Act.moodCode. The vote was found “Persuasive With Mod”, with the understanding that M and M would undertake a detailed review of these concept definitions for a future release of the RIM.
2.16.840.1.113883.5.1001
A set of codes (e.g., for routine, emergency), specifying the urgency under which the Act happened, can happen, is happening, is intended to happen, or is requested/demanded to happen.
2.16.840.1.113883.5.7
A set of codes specifying the motivation, cause, or rationale of an Act, when such rationale is not reasonably represented as an ActRelationship of type “has reason” linking to another Act. Examples: Example reasons that might qualify for being coded in this field might be: “routine requirement”, “infectious disease reporting requirement”, “on patient request”, “required by law”.
2.16.840.1.113883.5.8
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.10
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.12
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.13
ns1:pUsed to indicate that the target of the relationship will be a filtered subset of the total related set of targets.</ns1:p>ns1:pUsed when there is a need to limit the number of components to the first, the last, the next, the total, the average or some other filtered or calculated subset.</ns1:p>
2.16.840.1.113883.5.1099
The source is an excerpt from the target.
2.16.840.1.113883.5.1002
An anatomical location on an organism which can be the focus of an act.
2.16.840.1.113883.5.1052
Codes representing the defined possible states of an Act, as defined by the Act class state machine.
2.16.840.1.113883.5.14
A jurisdictional mandate in the US relating to privacy. Deprecation Comment: Content moved to ActCode under _ActPrivacyLaw; use that instead.
2.16.840.1.113883.5.1138
OpenIssue: Missing Description
2.16.840.1.113883.5.1053
Description: Code that specifies whether an address part names the street, city, country, postal code, post box, etc. Discussion: The hierarchical nature of these concepts shows composition. E.g. “Street Name” is part of “Street Address Line”
2.16.840.1.113883.5.16
Codes that provide guidance around the circumstances in which a given address should be used.
2.16.840.1.113883.5.1119
The gender of a person used for adminstrative purposes (as opposed to clinical gender)
2.16.840.1.113883.5.1
AmericanIndianAlaskaNativeLanguages
American Indian and Alaska Native languages currently being used in the United States.
2.16.840.1.113883.5.1054
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1055
Calendar cycle identifiers
2.16.840.1.113883.5.9
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1017
Internet Assigned Numbers Authority (IANA) Charset Types
2.16.840.1.113883.5.21
Identifies how to interpret the instance of the code, codeSystem value in a set of translations. Since HL7 (or a government body) may mandate that codes from certain code systems be sent in conformant messages, other synonyms that are sent in the translation set need to be distinguished among the originally captured source, the HL7 specified code, or some future role. When this code is NULL, it indicates that the translation is an undefined type. When valued, this property must contain one of the following values: SRC - Source (or original) code HL7 - HL7 Specified or Mandated SH - both HL7 mandated and the original code (precoordination) There may be additional values added to this value set as we work through the use of codes in messages and determine other Use Cases requiring special interpretation of the translations.
2.16.840.1.113883.5.1074
Describes the type of communication function that the associated entity plays in the associated transmission.
2.16.840.1.113883.5.1056
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1009
A set of codes specifying the security classification of acts and roles in accordance with the definition for concept domain “Confidentiality”.
2.16.840.1.113883.5.25
The type of cap associated with a container
2.16.840.1.113883.5.26
A material in a blood collection container that facilites the separation of of blood cells from serum or plasma
2.16.840.1.113883.5.27
Description: Identifies the order in which content should be processed.
2.16.840.1.113883.5.1110
A code that specifies how an ActRelationship or Participation contributes to the context of an Act, and whether it may be propagated to descendent Acts whose association allows such propagation (see also attributes Participation.contextControlCode, ActRelationship.contextControlCode, ActRelationship.contextConductionInd).
2.16.840.1.113883.5.1057
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1123
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1080
Domain values for the Device.Alert_levelCode
2.16.840.1.113883.5.31
Identifies the current completion state of a clinical document.
2.16.840.1.113883.5.33
Identifies the storage status of a document.
2.16.840.1.113883.5.34
Years of education that a person has completed
2.16.840.1.113883.5.1077
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1059
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.37
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.40
Classifies the Entity class and all of its subclasses. The terminology is hierarchical. At the top is this HL7-defined domain of high-level categories (such as represented by the Entity subclasses). Each of these terms must be harmonized and is specializable. The value sets beneath are drawn from multiple, frequently external, domains that reflect much more fine-grained typing.
2.16.840.1.113883.5.41
OpenIssue: Missing description.
2.16.840.1.113883.5.1060
EntityDeterminer in natural language grammar is the class of words that comprises articles, demonstrative pronouns, and quantifiers. In the RIM, determiner is a structural code in the Entity class to distinguish whether any given Entity object stands for some, any one, or a specific thing.
2.16.840.1.113883.5.30
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.42
OpenIssue: Needs description
2.16.840.1.113883.5.43
Description: The qualifier is a set of codes each of which specifies a certain subcategory of the name part in addition to the main name part type. For example, a given name may be flagged as a nickname, a family name may be a pseudonym or a name of public records.
2.16.840.1.113883.5.1122
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.44
Description: Indicates whether the name part is a given name, family name, prefix, suffix, etc.
2.16.840.1.113883.5.1121
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.45
Description: A set of codes advising a system or user which name in a set of names to select for a given purpose.
2.16.840.1.113883.5.1120
Kinds of risks associated with the handling of the material..
2.16.840.1.113883.5.46
Codes representing the defined possible states of an Entity, as defined by the Entity class state machine.
2.16.840.1.113883.5.1061
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.49
In the United States, federal standards for classifying data on ethnicity determine the categories used by federal agencies and exert a strong influence on categorization by state and local agencies and private sector organizations. The federal standards do not conceptually define ethnicity, and they recognize the absence of an anthropological or scientific basis for ethnicity classification. Instead, the federal standards acknowledge that ethnicity is a social-political construct in which an individual’s own identification with a particular ethnicity is preferred to observer identification. The standards specify two minimum ethnicity categories: Hispanic or Latino, and Not Hispanic or Latino. The standards define a Hispanic or Latino as a person of “Mexican, Puerto Rican, Cuban, South or Central America, or other Spanish culture or origin, regardless of race.” The standards stipulate that ethnicity data need not be limited to the two minimum categories, but any expansion must be collapsible to those categories. In addition, the standards stipulate that an individual can be Hispanic or Latino or can be Not Hispanic or Latino, but cannot be both.
2.16.840.1.113883.5.50
Code for the mechanism by which the exposure agent was exchanged or potentially exchanged by the participants involved in the exposure.
2.16.840.1.113883.5.1113
Open Issue: It appears that the printnames are suboptimal and should be improved for many of the existing codes.
2.16.840.1.113883.5.1022
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.51
The styles of context conduction usable by relationships within a static model derived from tyhe HL7 Reference Information Model.
2.16.840.1.113883.5.1129
This code system holds version codes for the Version 3 standards. Values are to be determined by HL7 and added with each new version of the HL7 Standard.
2.16.840.1.113883.5.1097
The possible modes of updating that occur when an attribute is received by a system that already contains values for that attribute.
2.16.840.1.113883.5.57
HtmlLinkType values are drawn from HTML 4.0 and describe the relationship between the current document and the anchor that is the target of the link
2.16.840.1.113883.5.58
Specifies the reliability with which the identifier is known. This attribute MAY be used to assist with identifier matching algorithms.
2.16.840.1.113883.5.1117
Description: Codes to specify the scope in which the identifier applies to the object with which it is associated, and used in the datatype property II.
2.16.840.1.113883.5.1116
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1010
A value representing the method of expression of the language. Example: Expressed spoken, expressed written, expressed signed, received spoken, received written, received signed. OpenIssue: Description copied from Concept Domain of same name. Must be verified.
2.16.840.1.113883.5.60
A value representing the level of proficiency in a language. Example: Excellent, good, fair, poor. OpenIssue: Description copied from Concept Domain of same name. Must be verified.
2.16.840.1.113883.5.61
A code depicting the living arrangements of a person
2.16.840.1.113883.5.63
Tells a receiver to ignore just the local markup tags (local_markup, local_header, local_attr) when value=”markup”, or to ignore the local markup tags and all contained content when value=”all”
2.16.840.1.113883.5.65
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.66
Codes representing the defined possible states of a Managed Participation, as defined by the Managed Participation class state machine.
2.16.840.1.113883.5.1062
The closeness or quality of the mapping between the HL7 concept (as represented by the HL7 concept identifier) and the source coding system. The values are patterned after the similar relationships used in the UMLS Metathesaurus. Because the HL7 coding sy
2.16.840.1.113883.5.67
* * * No description supplied * * * Open Issue: The specific meanings of these codes can vary somewhat by jurisdiction and implementation so caution should be used when determining equivalency.
2.16.840.1.113883.5.2
Indicates that the receiver has messages for the sender OpenIssue: Description does not make sense relative to name of coding system. Must be reviewed and improved.
2.16.840.1.113883.5.1083
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.81
A collection of codes specifying why a valid value is not present.
2.16.840.1.113883.5.1008
High level observation categories for the general type of observation being made. URL: http://hl7-fhir.github.io/valueset-observation-category.html This is an inline code system http://hl7.org/fhir/observation-category.
2.16.840.1.113883.4.642.1.222
One or more codes providing a rough qualitative interpretation of the observation, such as “normal” / “abnormal”, “low” / “high”, “better” / “worse”, “resistant” / “susceptible”, “expected” / “not expected”. The value set is intended to be for ANY use where coded representation of an interpretation is needed.
2.16.840.1.113883.5.83
A code that provides additional detail about the means or technique used to ascertain the observation. Examples: Blood pressure measurement method: arterial puncture vs. sphygmomanometer (Riva-Rocci), sitting vs. supine position, etc. OpenIssue: Description copied from Concept Domain of same name. Must be verified. Note that the Domain has a full discussion about use of the attribute and constraining that is not appropriate for the code system description. Needs to be improved.
2.16.840.1.113883.5.84
This domain is the root domain to which all HL7-recognized value sets for the Observation.value attribute will be linked when Observation.value has a coded data type. OpenIssue: Description copied from Concept Domain of same name. Must be corrected..
2.16.840.1.113883.5.1063
This code is used to specify the exact function an actor had in a service in all necessary detail. This domain may include local extensions (CWE).
2.16.840.1.113883.5.88
A set of codes specifying the modality by which the Entity playing the Role is participating in the Act. Examples: Physically present, over the telephone, written communication. Rationale: Particularly for author (originator) participants this is used to specify whether the information represented by the act was initially provided verbally, (hand-)written, or electronically. Open Issue: There needs to be a reexamination of the hierarchies as there seems to be some muddling between ELECTRONIC and other concepts that involve electronic communication that are in other hierarchies.
2.16.840.1.113883.5.1064
A set of codes specifying whether and how the participant has attested his participation through a signature and or whether such a signature is needed. Examples: A surgical Procedure act object (representing a procedure report) requires a signature of the performing and responsible surgeon, and possibly other participants. (See also: Participation.signatureText.)
2.16.840.1.113883.5.89
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.90
Patient VIP code
2.16.840.1.113883.5.1075
Describes payment terms for a financial transaction, used in an invoice. This is typically expressed as a responsibility of the acceptor or payor of an invoice.
2.16.840.1.113883.5.91
A code identifying a person’s disability.
2.16.840.1.113883.5.93
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1020
Codes used to specify whether a message is part of a production, training, or debugging system.
2.16.840.1.113883.5.100
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.101
The domain of coded values used as parameters within QueryByParameter queries.
2.16.840.1.113883.5.1096
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.102
Definition: Defines the units associated with the magnitude of the maximum size limit of a query response that can be accepted by the requesting application.
2.16.840.1.113883.5.1112
A code classifying the general nature of the response to a given query. Includes whether or not data was found, or whether an error occurred.
2.16.840.1.113883.5.1067
A code specifying the state of the Query.
2.16.840.1.113883.5.103
In the United States, federal standards for classifying data on race determine the categories used by federal agencies and exert a strong influence on categorization by state and local agencies and private sector organizations. The federal standards do not conceptually define race, and they recognize the absence of an anthropological or scientific basis for racial classification. Instead, the federal standards acknowledge that race is a social-political construct in which an individual’s own identification with one more race categories is preferred to observer identification. The standards use a variety of features to define five minimum race categories. Among these features are descent from “the original peoples” of a specified region or nation. The minimum race categories are American Indian or Alaska Native, Asian, Black or African American, Native Hawaiian or Other Pacific Islander, and White. The federal standards stipulate that race data need not be limited to the five minimum categories, but any expansion must be collapsible to those categories.
2.16.840.1.113883.5.104
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.105
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.106
Assigment of spiritual faith affiliation
2.16.840.1.113883.5.1076
Specifies whether a response is expected from the addressee of this interaction and what level of detail that response should include
2.16.840.1.113883.5.108
Defines the timing and grouping of the response instances. OpenIssue: Description copied from Concept Domain of same name. Must be verified.
2.16.840.1.113883.5.109
Specifies the mode, immediate versus deferred or queued, by which a receiver should communicate its receiver responsibilities.
2.16.840.1.113883.5.1126
Codes for the Role class hierarchy. The values in this hierarchy, represent a Role which is an association or relationship between two entities - the entity that plays the role and the entity that scopes the role. Roles names are derived from the name of the playing entity in that role. The role hierarchy stems from three core concepts, or abstract domains: RoleClassOntological is an abstract domain that collects roles in which the playing entity is defined or specified by the scoping entity. RoleClassPartitive collects roles in which the playing entity is in some sense a “part” of the scoping entity. RoleClassAssociative collects all of the remaining forms of association between the playing entity and the scoping entity. This set of roles is further partitioned between: RoleClassPassive which are roles in which the playing entity is used, known, treated, handled, built, or destroyed, etc. under the auspices of the scoping entity. The playing entity is passive in these roles in that the role exists without an agreement from the playing entity. RoleClassMutualRelationship which are relationships based on mutual behavior of the two entities. The basis of these relationship may be formal agreements or they may bede facto behavior. Thus, this sub-domain is further divided into: RoleClassRelationshipFormal in which the relationship is formally defined, frequently by a contract or agreement. Personal relationship which inks two people in a personal relationship. The hierarchy discussed above is represented In the current vocabulary tables as a set of abstract domains, with the exception of the “Personal relationship” which is a leaf concept. OpenIssue: Description copied from Concept Domain of same name. Must be verified.
2.16.840.1.113883.5.110
A set of codes further specifying the kind of Role; specific classification codes for further qualifying RoleClass codes.
2.16.840.1.113883.5.111
Description: Codes representing possible states of a RoleLink, as defined by the RoleLink class state machine.
2.16.840.1.113883.5.1137
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.107
Codes representing the defined possible states of an Role, as defined by the Role class state machine.
2.16.840.1.113883.5.1068
The path the administered medication takes to get into the body or into contact with the body.
2.16.840.1.113883.5.112
Specifies sequence of sort order.
2.16.840.1.113883.5.113
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1069
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.129
Identifies what sort of change is permitted or has occurred between the item that was ordered/requested and the one that was/will be provided.
2.16.840.1.113883.5.1071
These values are defined within the XHTML 4.0 Table Model
2.16.840.1.113883.5.131
These values are defined within the XHTML 4.0 Table Model
2.16.840.1.113883.5.132
These values are defined within the XHTML 4.0 Table Model
2.16.840.1.113883.5.133
These values are defined within the XHTML 4.0 Table Model
2.16.840.1.113883.5.134
These values are defined within the XHTML 4.0 Table Model
2.16.840.1.113883.5.136
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.137
Description: Concepts that define the telecommunication capabilities of a particular device. Used to identify the expected capabilities to be found at a particular telecommunication address.
2.16.840.1.113883.5.1118
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.139
TransmissionRelationshipTypeCode
Description: A code specifying the meaning and purpose of every TransmissionRelationship instance. Each of its values implies specific constraints to what kinds of Transmission objects can be related and in which way.
2.16.840.1.113883.5.1111
INDIAN ENTITIES RECOGNIZED AND ELIGIBLE TO RECEIVE SERVICES FROM THE UNITED STATES BUREAU OF INDIAN AFFAIRS
2.16.840.1.113883.5.140
The manufacturer of a vaccine.
2.16.840.1.113883.5.144
Code system of concepts representing a person’s job type as defined by compensation and sector (e.g. paid vs. unpaid, self-employed vs. not self-employed, government vs. private, etc.).
2.16.840.1.113883.5.1139
Description: Codes for concepts describing the approval level of HL7 artifacts. This code system reflects the concepts expressed in HL7’s Governance & Operations Manual (GOM) past and present.
2.16.840.1.113883.5.1130
**** MISSING DEFINITIONS ****
2.16.840.1.113883.5.1132
Description: Codes identifying types of HL7 Implementation Technology Specifications
2.16.840.1.113883.5.1135
HL7 implementation technology specification versions. These codes will document the ITS type and version for message encoding. The code will appear in the instances based upon rules expressed in the ITS, and do not appear in the abstract message, either as it is presented to received from the ITS.
2.16.840.1.113883.5.1092
Description: Codes for HL7 publishing domains (specific content area)
2.16.840.1.113883.5.1136
Description: Codes for HL7 publishing sections (major business categories)
2.16.840.1.113883.5.1133
Description: Codes for HL7 publishing sub-sections (business sub-categories)
2.16.840.1.113883.5.1134
Description: Coded concepts representing Binding Realms (used for Context Binding of terminology in HL7 models) and/or Namespace Realms (used to help ensure unique identification of HL7 artifacts). This code system is partitioned into three sections: Affiliate realms, Binding realms and Namespace realms. All affiliate realm codes may automatically be used as both binding realms and namespace realms. Furthermore, affiliate realms are the only realms that have authority over the creation of binding realms. (Note that ‘affiliate’ includes the idea of both international affiliates and the HL7 International organization.) All other codes must be associated with an owning affiliate realm and must appear as a specialization of _BindingRealm or _NamespaceRealm. For affiliates whose concepts align with nations, the country codes from ISO 3166-1 2-character alpha are used for the code when possible so these codes should not be used for other realm types. It is recommended that binding realm and namespace codes submitted by affiliates use the realm code as a prefix to avoid possible collisions with ISO codes. However, tooling does not currently support namepace realm codes greater than 2 characters. Open Issue: The name of the concept property “owningAffiliate” should be changed to better reflect that the property value is the human readable name of the organizational entity that manages the Realm identified by the Realm Code. Open Issue: In spite of the inability of tooling to process codes longer than 2 characters, there is at least one realm codes (‘SOA’) that was added that is 3 characters in length.
2.16.840.1.113883.5.1124
Description: Identifies allowed codes for HL7aTMs v3 conformance property.
2.16.840.1.113883.5.1125
Description: Based on concepts for resolutions from HL7 ballot spreadsheet according to HL7’s Governance & Operations Manual (GOM).
2.16.840.1.113883.5.1131
OpenIssue: Missing description.
2.16.840.1.113883.5.85
This vocabulary is defined by Implementation Guide for CDA Release 2 - Level 1 - Care Record Summary (US realm). It describes roles recognized through the issuance of an insurance policy to a policyholder who a relationship with the covered party, such as spouse, child, etc. This vocabulary is essentially an inversion of the role relations of the HL7 CoverageRoleType vocabulary. It provides more detailed roles with respect to the underwriter (the scoping organization) for those participants in the policyholder role for a patient. Open Issue: The code values for this coding system must be extracted from the CDA documentation and brought forward through Harmonization for instantiation in this repository.
2.16.840.1.113883.5.1128
ns1:pThe style code is used within the CDA/SPL narrative block to give the instance author some control over various aspects of style</ns1:p>
2.16.840.1.113883.5.1095
Identifies what sort of change is permitted or has occurred between the therapy that was ordered and the therapy that was/will be provided.
2.16.840.1.113883.5.1070
Description: This code system contains all HL7 artifacts of type TE (Trigger Event) that are created by HL7 or its affiliates or their designates using the realm namespacing rules approved by HL7. Local implementations who create trigger events outside of these namespacing rules, (e.g. using the ZZ realm code) must register their own code system. The specific list of legal codes can be found by consulting the HL7 publications (editions, ballots, implementation guides, etc.) published by HL7 Inc. and by the various HL7 affiliates and their designates. Codes shall be expressed in upper case, with separator as shown in HL7 publications with no version id. E.g. PORX_TE123456UV.
2.16.840.1.113883.1.18
Note: v2 code systems may or may not be case sensitive. v2 Code systems will have the CodeSystem.caseSensitive
correctly populated in a future version of this specification.
URI (all prefixed with http://terminology.hl7.org/CodeSystem/v2-/)
ID
OID
Administrative Sex
Marital Status
Event Type
Patient Class
0006
ReligionVersion Dependent. Use one of:
Admission Type
Acknowledgment code
Ambulatory Status
STOCK LOCATION
Transaction Type
Admit Source
Priority
ROUTE
SITE ADMINISTERED
Order status
Condition Code
What subject filter
Diagnosis Type
Check Digit Scheme
Event Reason
Relationship
Specimen Action Code
Employment Status
Hospital Service
Specimen Source Codes
Diagnostic Service Section ID
Message Type
Interpretation Codes
Nature of Abnormal Testing
Outlier Type
Observation Result Status Codes Interpretation
Query Priority
Re-Admission Indicator
Type of Agreement
Invocation event
Delayed acknowledgment type
Processing ID
Version ID
Source of Comment
Query/response format code
Deferred response type
Query results level
Report priority
Bed Status
Order Control Codes
Response Flag
Charge Type
Result Status
Transportation Mode
Quantity Limited Request
Allergen Type
Allergy Severity
Visit User Code
Contact Role
Procedure Practitioner Identifier Code Type
Assignment of Benefits
Yes/no Indicator
Mail Claim Party
Military Service
Military Rank/Grade
Military Status
Eligibility Source
Room Type
Amount Type
Policy Type
Money or Percentage Indicator
Day Type
Certification Patient Type
Value Code
Accept/Application Acknowledgment Conditions
Which date/time qualifier
Which date/time status qualifier
Date/time selection qualifier
Diet Code Specification Type
Tray Type
Allow Substitution
Route of Administration
Body Site
Administration Device
Administration Method
RX Component Type
Substitution Status
Processing Priority
Reporting Priority
Derived Specimen
Coordination of Benefits
Nature of Service/Test/Observation
Master File Identifier Code
Confidentiality Code
File Level Event Code
Response Level
Masterfile Action Code
MFN Record-level Error Return
Active/Inactive
Preferred Method of Contact
Provider Billing
Ethnic Group
Address Type
Type of Referenced Data
Amount Class
Name Type
Telecommunication Use Code
Telecommunication Equipment Type
Identifier Type
Organizational Name Type
Price Type
Segment Action Code
Processing Mode
Query Response Status
Relational Operator
Relational Conjunction
Alternate Character Sets
Purge Status Code
Special Program Code
Publicity Code
Patient Status Code
Visit Priority Code
Living Arrangement
Living Dependency
Transport Arranged
Escort Required
Manufacturers of Vaccines (code=MVX)
Diagnosis Classification
DRG Payor
Procedure Functional Type
Student Status
- Insurance Company Contact Reason
Report Timing
Report Source
Event Reported To
Event Qualification
Event Seriousness
Event Expected
Event Consequence
Patient Outcome
Primary Observer’s Qualification
Identity May Be Divulged
Status of Evaluation
Product Source
Relatedness Assessment
Action Taken in Response to the Event
Causality Observations
Indirect Exposure Mechanism
Kind of Quantity
Duration Categories
Time Delay Post Challenge
Nature of Challenge
Relationship Modifier
Modality
Patient Location Type
Location Equipment
Privacy Level
Level of Care
Specialty Type
Days of the Week
Override
Charge On Indicator
Document Type
Document Completion Status
Document Confidentiality Status
Document Availability Status
Document Storage Status
Appointment reason codes
Appointment Type Codes
Filler status codes
Allow Substitution Codes
Referral Priority
Referral Type
Referral Disposition
Referral Status
Referral Category
Provider Role
Problem/Goal Action Code
MIME base64 encoding characters
Subtype of Referenced Data
Vaccines Administered
Time Selection Criteria Parameter Class Codes
CP Range Type
Encoding
Universal ID Type
Person Location Type
Coverage Type
Job Status
Living Will Code
Organ Donor Code
Annotations
Dispense Method
Completion Status
Action Code
Location Characteristic ID
Location Relationship ID
Visit Indicator
Quantity Method
Marketing Basis
Facility Type
Source Type
Disabled Person Code
Repeat Pattern
Referral Reason
Certification Status
Practitioner ID Number Type
Advanced Beneficiary Notice Code
Patient’s Relationship to Insured
Occurrence Code
Occurrence Span
Message Structure
Primary Key Value Type
Alternate Character Set Handling Scheme
Message Error Condition Codes
Diagnosis Priority
0360
Degree/License/CertificateVersion Dependent. Use one of:
Assigning Authority
Comment Type
Equipment State
Local/Remote Control State
Alert Level
Remote Control Command
Specimen Role
Container Status
Additive/Preservative
Specimen Component
Treatment
System Induced Contaminants
Artificial Blood
Special Handling Code
Other Environmental Factors
Substance Status
Substance Type
Command Response
Processing Type
Analyte Repeat Status
0391
Segment GroupVersion Dependent. Use one of:
Match Reason
Match Algorithms
Response Modality
Modify Indicator
Coding System
Sequencing
Continuation Style Code
Government Reimbursement Program
School Type
Language Ability
Language Proficiency
Participant Organization Unit Type
Application Change Type
Supplemental Service Information Values
Transfer Type
Procedure DRG Type
Tissue Type Code
Procedure Priority
Severity of Illness Code
Triage Code
Case Category Code
Gestation Category Code
Newborn Code
Blood Product Code
Risk Management Incident Code
Incident Type Code
Production Class Code
Mode of Arrival Code
Recreational Drug Use Code
Admission Level of Care Code
Precaution Code
Patient Condition Code
Advance Directive Code
Sensitivity to Causative Agent Code
Alert Device Code
Allergy Clinical Status
Data Types
Immunization Registry Status
Location Service Code
Provider Role
Name Assembly Order
Identity Reliability Code
Event Type
Type of Bill Code
Revenue code
Overall Claim Disposition Code
Reimbursement Action Code
Denial or Rejection Code
Name/Address Representation
Ambulatory Payment Classification Code
Payment Adjustment Code
Packaging Status Code
Reimbursement Type Code
TQ Conjunction ID
Formulary Status
Practitioner Organization Unit Type
Charge Type Reason
Controlled Substance Schedule
Formulary Status
Pharmacy Order Types
Order Type
Authorization Mode
Dispense Type
Extended Priority Codes
Specimen Type
Specimen Collection Method
Risk Codes
Specimen Reject Reason
Specimen Quality
Specimen Appropriateness
Specimen Condition
Specimen Child Role
Body Site Modifier
Consent Type
Consent Mode
Consent Status
Consent Bypass Reason
Consent Disclosure Level
Consent Non-Disclosure Reason
Non-Subject Consenter Reason
Sequence/Results Flag
Sequence Condition Code
Cyclic Entry/Exit Indicator
Service Request Relationship
Observation Result Handling
Blood Product Processing Requirements
Blood Product Dispense Status
BP Observation Status Codes Interpretation
Blood Product Transfusion/Disposition Status
Transfusion Adverse Reaction
Error Severity
Inform Person Code
Override Type
Message Waiting Priority
Computation Type
Sequence condition
Calendar Alignment
Event Related Period
Precision
Organization, Agency, Department
Notify Clergy Code
Signature Code
Certificate Status
Institution Relationship Type
Inactive Reason Code
Container Condition
Jurisdictional Breadth
Signatory’s Relationship to Subject
Body Parts
Invoice Control Code
Invoice Reason Codes
Invoice Type
Benefit Group
Payee Type
Payee Relationship to Invoice
Product/Service Status
Product/Services Clarification Codes
Processing Consideration Codes
Adjustment Category Code
Provider Adjustment Reason Code
Blood Unit Type
Adjustment Action
Payment Method Code
Invoice Processing Results Status
Tax status
User Authentication Credential Type Code
Address Expiration Reason
Address Usage
Protection Code
Item Status Codes
Item Importance Codes
Reorder Theory Codes
Labor Calculation Type
Date Format
Device Type
Lot Control
Device Data State
Load Status
Device Status
Cycle Type
Access Restriction Value
Access Restriction Reason Code
Mood Codes
CCL Value
DRG Diagnosis Determination Status
Grouper Status
DRG Status Patient
DRG Status Financial Calculation
DRG Grouping Status
Status Weight At Birth
DRG Status Respiration Minutes
Status Admission
DRG Procedure Determination Status
DRG Procedure Relevance
Item Status
Item Type
Approving Regulatory Agency
Ruling Act
Sterilization Type
Package
MIME Types
Telecommunication Expiration Reason
Supply Risk Codes
Role Executing Physician
Medical Role Executing Physician
Side of body
Present On Admission (POA) Indicator
Security Check Scheme
Shipment Status
ActPriority
Confidentiality
Patient Results Release Categorization Scheme
Participation
Root Cause
Relevant Clinicial Information
Bolus Type
PCA Type
Exclusive Test
Preferred Specimen/Attribute Status
Certification Type Code
Certification Category Code
Process Interruption
Cumulative Dosage Limit UoM
Phlebotomy Issue
Phlebotomy Status
Arm Stick
Intended Procedure Type
Process Interruption Reason
Name/address representation
®© HL7.org 2011+. FHIR Release 4 (v4.0.0) generated on Thu, Dec 27, 2018. QA Page
Links: Search | Version History | Table of Contents | Credits | Compare to R3 | | Propose a change
try { var currentTabIndex = sessionStorage.getItem(‘fhir-codesystem-tab-index’); } catch(exception){ } if (!currentTabIndex) currentTabIndex = ‘0’; $( ‘#tabs’ ).tabs({ active: currentTabIndex, activate: function( event, ui ) { var active = $(‘.selector’).tabs(‘option’, ‘active’); currentTabIndex = ui.newTab.index(); document.activeElement.blur(); try { sessionStorage.setItem(‘fhir-codesystem-tab-index’, currentTabIndex); } catch(exception){ } } });